OPERATIONS
Basic operations
Control panel | Remote sensor | Check the current clock time/other information. | |
• Turn on the power. | DO NOT expose to strong light. | See also “CLK DISP“ of “General | |
• | Turn off the power [Hold]. |
|
|
• | Attenuate the sound (if the |
|
|
| power is on). |
|
|
Select the source. | Volume control. |
Display window
Remote controller—RM-RK50
7Installing battery
| Warning: To prevent accidents and damage |
Lithium coin battery (CR2025) | • Do not install any battery other than CR2025 or its |
| equivalent. |
| • Store out of reach of children. |
| • Do not recharge, short, or dismantle. |
| • Do not dispose of in fire. |
| • Do not carry around with other metallic materials. |
For
7Features |
INSTRUCTIONS
•ST: Lights up when receiving an FM stereo broadcast with sufficient signal strength.
| LOUD (loudness) indicator |
| EQ (equalizer) indicator |
Main display (time, | Sound mode (iEQ: intelligent equalizer) |
playback information) | indicator |
• Turns the power on if pressed briefly or |
attenuates the sound when power is on. |
• Turns the power off if pressed and held. |
• Changes the FM/AM bands with 5U. |
• Changes the preset stations with D ∞. |
• Adjusts the volume level. |
• Selects the sound mode (iEQ: intelligent equalizer).
• Selects the source. • Searches for stations if pressed briefly.•Radio operations
Select preset station.• You can also use 5/ ∞to select preset station. Select “FM/AM.” Select the bands. Search for aManual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.
When an FM stereo broadcast is hard to receive
Disc operations
Eject disc.• Press SRC to listen to another playback source.
• 4 / ¢ | [Press] Select track number (01 | – 06). | |
[Press] | Go to the next or previous track. | [Hold] Select track number (07 | – 12). |
[Hold] |
|
|
All tracks will be played repeatedly until you change the source or eject the disc.
Manual presetting
Selecting the playback modes
After pressing M MODE, press the following buttons to...
| TRK RPT | : Plays the current track |
|
| repeatedly. |
| RPT OFF | : Cancels. |
| ALL RND | : Plays all tracks of the current |
|
| disc at random. |
| RND OFF | : Cancels. |
Changing the display information
: Clock with the current track number : The elapsed playing time with the current track number*If the current disc is an audio CD, “NO NAME” appears.Example: Storing the FM station of 92.5 MHz into preset number 4 of the FM1 band.
External component operations
Stereo mini plug (not supplied)Prohibiting disc ejection
You can lock a disc in the loading slot.To cancel the prohibition, repeat the same procedure.You can connect an external component to the AUX (auxiliary) input jack on the control panel.
Turn on the connectedPortable audio player, etc.component and start playing the source.SETTINGS
| Sound adjustments |
| Adjusting the sound | |||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LOUD*4 (loudness) | : Boost low and high frequencies to | LOUD ON or |
| produce a | LOUD OFF |
| a low volume level. |
|
SUB.W (subwoofer) | : Adjust the subwoofer output level. | 00 to 08 |
Preset values | BAS | MID | TRE | LOUD |
| ||||
Indication (For) | (bass) | (treble) | (loudness) | |
|
|
|
|
|
USER (Flat sound) | 00 | 00 | 00 | OFF |
ROCK (Rock or disco music) | +03 | 00 | +02 | OFF |
CLASSIC (Classical music) | +01 | 00 | +03 | OFF |
POPS (Light music) | +02 | +01 | +02 | OFF |
HIP HOP (Funk or rap music) | +04 | +01 | OFF | |
JAZZ (Jazz music) | +03 | 00 | +03 | OFF |
BAS*2 (bass) | : Adjust the bass. | |
MID*2 | : Adjust the middle frequencies sound level. | |
TRE*2 (treble) | : Adjust the treble. | |
FAD*3 (fader) | : Adjust the front and rear speaker balance. | R06 to F06 |
BAL (balance) | : Adjust the left and right speaker balance. | L06 to R06 |
VOL (volume) | : Adjust the volume. | 00 to 50 | |
|
|
| (or 00 to 30)*5 |
*1 | Displayed only when “L/O MODE” is set to “WOOFER.” |
| |
*2 | When you adjust the bass, | ||
| is stored for the currently selected sound mode (iEQ) including “USER.” | ||
*3 | If you are using a | ||
*4 | The adjustment made (LOUD ON/LOUD OFF) will be applied to all sound modes | ||
| (iEQ). |
|
|
*5 | Depending on the amplifier gain control setting. |
|