Tape remaining time indicator

25MIN MIN

(Now calculating)

120MIN

119MIN

3MIN

2MIN

(Blinking)

1MIN

(Blinking)

0MIN

(Blinking)

Recording Start/Stop Button

DISPLAY Button

EN17

4

 

STOP RECORDING

 

 

 

Press the Recording Start/Stop Button again to stop

 

 

 

recording.

 

 

 

 

 

 

 

 

•The camcorder re-enters the Record-Standby mode.

 

NOTES:

 

The cassette holder cannot be opened unless a power

 

supply is attached.

 

There may be a delay after you slide EJECT until the

 

holder opens. Do not use force.

 

The tape remaining time is only displayed in the

 

viewfinder as shown.

 

The remaining time indicated in the viewfinder is

 

approximate.

 

The time required to calculate the remaining tape

 

length, and the accuracy of the calculation, may vary

 

RECORDING

according to the type of tape used.

The tape remaining time indicator is correct only if the

 

correct tape length has been selected (pg. 12).

 

“TAPE END” appears when the tape reaches its end, and

 

the power goes off automatically if left in this condition

 

for 5 minutes. “TAPE END” also appears when a cassette

 

whose tape is already at its end is loaded.

 

If the Record–Standby mode continues for 5 minutes

 

without performing Zoom or any other operations, the

 

camcorder’s power shuts off automatically. Set the

 

Power Switch to “POWER OFF”, and then back to

 

“CAMERA” to turn the camcorder on again.

 

If the Recording Start/Stop button is pressed after the

 

Record-Standby mode has continued for over

 

5 minutes, recording may not start immediately.

 

If you are recording on a cassette from the middle (such

 

as when a tape is removed and re-inserted during

 

recording), use the Retake function (pg. 19) to find

 

the end of the last recording so you don’t erase any of it.

 

The LENS COVER warning blinks for about 5 seconds

 

when the camcorder is turned on with the cover closed.

 

While shooting, sound is not heard from the speaker.

 

To turn the tally lamp off during recording, refer to pgs.

 

26 and 28.

 

Viewfinder Indications

 

By pressing DISPLAY, you can make the following, indica-

 

tions appear/disappear from the camcorder’s display: cassette

 

warning, tape remaining time, battery pack remaining

 

power indicator and tape length indicator (pg. 45).

 

 

 

 

 

 

1

 

PRESS DISPLAY BUTTON

 

 

When you do not want the indications to appear,

 

 

 

press DISPLAY for longer than approximately 1

 

 

 

second. Certain indications disappear.

 

 

 

Press again for longer than approx. 1 second to make

 

 

 

the indications reappear.

 

NOTE:

 

Even if DISPLAY is pressed, the tape remaining time

 

appears blinking when the tape is about to reach its end,

 

and the battery pack remaining power indicator also

 

appears blinking when the power is almost gone.

 

Page 17
Image 17
JVC GR-AX841 manual Viewfinder Indications, Stop Recording, Press Display Button

GR-AX841 specifications

The JVC GR-AX841 is a compact and innovative camcorder that gained popularity in the early 1990s, standing out for its unique feature set and user-friendly operation. This model is part of JVC's GR series, renowned for its advanced technologies and robust performance in video recording.

One of the main features of the GR-AX841 is its lightweight and portable design, which makes it an excellent choice for capturing moments on the go. The camcorder is equipped with a high-quality 16:9 widescreen recording capability, allowing users to produce videos with a more cinematic aspect ratio. This feature enhances the viewing experience, creating a wider and more immersive presentation of footage.

The GR-AX841 incorporates a 3CCD image sensor technology, which significantly improves color accuracy and image quality compared to traditional single-chip systems. By utilizing three separate sensors for red, green, and blue, the camcorder generates vibrant and true-to-life colors. This technology is particularly beneficial for amateur filmmakers and videographers who desire professional-looking results without needing professional equipment.

In terms of recording capability, the GR-AX841 supports various tape formats, including S-VHS and VHS-C. This versatility allows users to choose their preferred recording medium while maintaining high video quality. The S-VHS format, in particular, offers superior resolution and clarity, making it ideal for capturing detailed images.

The camcorder also features advanced image stabilization technology, which significantly reduces the effects of shaky hands and movement during recording. This feature is crucial for creating smooth and stable footage, particularly when filming while walking or in dynamic environments.

Another noteworthy characteristic of the GR-AX841 is its intuitive control layout and user-friendly interface. This makes it accessible for beginners while still offering advanced options for seasoned users. The built-in LCD screen provides real-time feedback and preview capabilities, enabling users to frame their shots accurately.

Overall, the JVC GR-AX841 marries compact design with advanced technology to deliver an exceptional video recording experience. Its combination of 3CCD imaging, widescreen recording, and user-friendly features ensures that both casual users and serious videographers can achieve stunning results and cherish their memories in high quality. Whether for home videos or more creative projects, the GR-AX841 remains a noteworthy option in the history of camcorders.