12
BASIC FEATURES
5Sec. Rec (5-sec. Recording)
To record a scene for 5 seconds, providing quick
scene transitions like those seen in TV
programmes.
1)Make sure the recording mode is set to SP.
2)During RecordStandby, press 5SEC. REC 2.
5S a appears and 5Sec. Rec is reserved.
3)Press the Recording Start/Stop Button 9.
Recording starts, and after 5-second recording
is finished, the camcorder re-enters the Record
Standby mode automatically.
4)To cancel the 5Sec. Rec. function, press 5SEC.
REC 2 again so that 5S a disappears.
Fade/Wipe ( pg. 23) cannot be activated by
pressing 5SEC. REC 2.
Backlight Compensation
To quickly increase the brightness of the subject
relative to the background.
1)Press BACK LIGHT w during recording. “ ” is
displayed and the subject is brightened.
2)To cancel Backlight Compensation, press BACK
LIGHT w again. “ ” disappears and the
brightness returns to the previous level.
Backlight Compensation functions in both
recording modes ( or “ ”).
Using BACK LIGHT w may make the subject too
bright, resulting in a washed out or white image.
BACK LIGHT w cannot be used when the
manual Exposure Control mode ( pg. 18) is
engaged.
Auto/Manual Focus
If correct focus cannot be obtained with Auto
Focus, use Manual Focus.
1)Set the Power Switch ! to “ ” while pressing
down the Lock Button 0 located on the switch.
2)Press FOCUS 4. “ ” appears.
3)To focus on a distant subject, rotate the MENU
Wheel 1 upward. “ ” appears and blinks.
To focus on a close subject, rotate the MENU
Wheel 1 downward. “ ” appears and blinks.
4)To cancel the Manual Focus, press FOCUS
4. “ ” disappears and the Auto Focus is
applied.
When the focus level cannot be adjusted any
farther or closer, or “ ” will blink.
GR-AX880 3/11/03, 10:16 AM12