JVC GR-AX880 manual Advanced Features, Fade/Wipe Effects

ADVANCED FEATURES

Fade/Wipe Effects

Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end.

1) Set the Power Switch ! to ” while pressing down the Lock Button 0 located on the switch.

2)Press FADE/WIPE ) repeatedly until the desired mode appears.

3)Press the Recording Start/Stop Button 9 to activate fade-in/out or wipe-in/out.

•Pressing and holding the Recording Start/Stop Button 9 allows you to vary the length for the image during fade in/out or wipe in/out.

•To cancel a fade or wipe, press FADE/WIPE ) repeatedly until “OFF” appears.

FADER: Fades in/out to a black screen.

MOSAIC (Fader): Gradually turns/returns the picture into/from a mosaic pattern.

SHUTTER (Wipe): A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre.

SLIDE (Wipe): A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.

DOOR (Wipe): Wipes in as the two halves of a black screen open to the left and right, revealing the scene, or wipes out and the black screen reappears from left and right to cover the scene.

CORNER (Wipe): Wipes in on a black screen from the upper right to the lower left corner, revealing the scene, or wipes out from lower left to upper right, leaving a black screen.

WINDOW (Wipe): Wipes in on a black screen from the centre of the screen towards the corners, revealing the scene, or wipe out from the corners to the centre, leaving a black screen.

23