JVC GR-AX880 t, &

o

e

PAUSE

180°180°

y

!

0

t&

Grip Adjustment

1) Separate the Velcro strip.

2) Pass your right hand through the loop and grasp

the grip.

3) Adjust so that your thumb and fingers can easily

operate the Recording Start/Stop Button 9 and

Power Zoom Lever 3. Refasten the Velcro strip.

Loading/Unloading A Cassette

1) Slide EJECT & until the cassette holder opens.

Do not use force to open.

2) Insert or remove a cassette. When inserting,

make sure the label is facing outward. j

appears when a cassette is loaded.

3)Press the Close button t to close the cassette

holder until it locks into place.

•Make sure the erase protection tab is in the

position that allows recording. If not, slide the tab.

Some cassettes have removable tabs. If the tab

has been removed, cover the hole with adhesive

tape.

•The cassette holder cannot be opened while the

camcorder is in the record mode or detached from

the power source.

Tripod Mounting

Align the screw and camera direction stud on the

tripod with the tripod mounting socket o. Then

tighten the screw.

CAUTION

When using a tripod, be

sure to open and extend

its legs fully to stabilise

the camcorder. To

prevent damage to the

unit caused by falling

over, do not use a

small-sized tripod.

Shoulder Strap Attachment

Thread the strap through the eyelet e, then fold it

back and thread it through the buckle. Repeat the

procedure to attach the other end of the strap to

the other eyelet e, making sure the strap is not

twisted. Adjust the length.

Viewfinder Adjustment

1) Set the Power Switch ! to “ ” or “ ” while

pressing down the Lock Button 0 located on the

switch.

2) Turn the Dioptre Adjustment Control y until the

indications in the viewfinder are clearly focused.

Erase

Protection tab

Gear

Turn to

take up

slack.

Cassette

holder

Velcro

Strip

GR-AX880 3/11/03, 10:16 AM8