JVC GR-AXM100 Adjusts focus automatically, Allows you to adjust focus manually pg, Cm 2 ft

EN29

FOCUS	AUTO	Adjusts focus automatically.
	MANU	Allows you to adjust focus manually (☞ pg. 30, 31).
EXPOSURE	AUTO	Adjusts exposure automatically.
	MANU	Allows you to adjust exposure manually (☞ pg. 32).
DATE/TIME	Allows you to set the current date and time (☞ pg. 11).
TELE MACRO	OFF	Usually the distance to a subject where the lens is in focus
	ON	depends on the zoom magnification. Unless there is a distance
		more than 1m (3.3 ft.) to the subject, the lens is out of focus at
		the maximum telephoto setting. When set to “ON”, you can
		shoot a subject as large as possible at a distance of approx. 60
		cm (2 ft.).
		•Depending on the zoom position, the lens may go out of focus.
TAPE LENGTH	Allows you to set the tape length depending on the tape used (☞ pg. 12).
M.W.B.	AUTO	This camcorder’s Automatic Color Temperature system senses
	: FINE	the color temperature of the ambient lighting for automatic
		white balance adjustment. However, precise color adjustment is
	: CLOUD	not possible under the following conditions:
		• When an object is in various shades of the same color.
	: HALOGEN
		• When a predominantly red or brown object is being shot
	MWB	outdoors.
		In these cases, use the camcorder’s built-in preset filters for
		white balance adjustment (☞ pg. 33).
ZOOM SPEED	FAST	Allows you to set the zooming speed (☞ pg. 20).
	SLOW
REC TIME	This feature allows you to set the parameters for Animation and Time-Lapse
	recording (☞ pg. 35).
INT. TIME	This feature allows you to set the parameters for Self-Timer (☞ pg. 34) and Time-
	Lapse recording (☞ pg. 35).
TALLY LAMP	ON	The tally lamp comes on to signal the start of recording.
	OFF	The tally lamp remains off at all times.
TITLE LANG.	Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
	of Instant Titles (☞ pg. 27)
JLIP ID NO.	This number is necessary when connecting the camcorder to a device such as a
	computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory
	setting is 07.
DEMO MODE	OFF	Automatic demonstration will not take place.
	ON	Demonstrates certain functions such as the Fader, Instant Titles
		etc. When “DEMO MODE” is set to “ON” and the Menu Screen
		is closed, demonstration starts.

NOTES:

●When a tape whose Erase Protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available.

●By turning off the camcorder or inserting a tape whose Erase Protection tab is in the position that allows recording into it, “DEMO MODE” is set to “OFF” automatically.

●During demonstration, all functions except zoom are disabled.

= Factory setting and when the Select Dial is set to AUTO LOCK