Tape remaining time indicator

25MIN MIN

(Now calculating)

120MIN

119MIN

3MIN

2MIN

(Blinking)

1MIN

(Blinking)

0MIN

(Blinking)

Recording Start/Stop Button

DISPLAY Button

EN17

4

 

STOP RECORDING

 

 

 

Press the Recording Start/Stop Button again to stop

 

 

 

recording.

 

 

 

 

 

 

 

 

•The camcorder re-enters the Record-Standby mode.

 

NOTES:

 

When the Power Switch is set to CAMERA and the LCD

 

monitor is opened at an angle of 60 degrees or more, the

 

LCD monitor switches on and the viewfinder switches

 

off automatically to save power.

 

The cassette holder cannot be opened unless a power

 

supply is attached.

 

There may be a delay after you slide EJECT until the

 

holder opens. Do not use force.

 

The tape remaining time is only displayed in the

 

viewfinder as shown.

 

The remaining time indicated in the viewfinder is

 

approximate.

 

The time required to calculate the remaining tape

 

 

length, and the accuracy of the calculation, may vary

 

according to the type of tape used.

RECORDING

The tape remaining time indicator is correct only if the

correct tape length has been selected (pg. 12).

 

“TAPE END” appears when the tape reaches its end, and

 

the power goes off automatically if left in this condition

 

for 5 minutes. “TAPE END” also appears when a cassette

 

whose tape is already at its end is loaded.

 

If the Record–Standby mode continues for 5 minutes

 

without performing Zoom or any other operations, the

 

camcorder’s power shuts off automatically. Set the

 

Power Switch to “POWER OFF”, and then back to

 

“CAMERA” to turn the camcorder on again.

 

If the Recording Start/Stop button is pressed after the

 

Record-Standby mode has continued for over

 

5 minutes, recording may not start immediately.

 

If you are recording on a cassette from the middle (such

 

as when a tape is removed and re-inserted during

 

recording), use the Retake function (pg. 21) to find

 

the end of the last recording so you don’t erase any of it.

 

The LENS COVER warning blinks for about 5 seconds

 

when the camcorder is turned on with the cover closed.

 

While shooting, sound is not heard from the speaker.

 

To turn the tally lamp off during recording, refer to pgs.

 

30 and 32.

 

LCD Monitor/Viewfinder Indications

 

Press DISPLAY to make the following indications appear/

 

disappear from the camcorder’s display: cassette warning,

 

tape remaining time, battery pack remaining power

 

indicator and tape length indicator (pg. 53).

 

 

 

 

 

 

1

 

PRESS DISPLAY BUTTON

 

 

To turn off the indications, press DISPLAY for more

 

 

 

than 1 second.

 

 

 

Press again for more than 1 second to make the

 

 

 

indications reappear.

 

NOTE:

 

Even if the indications are off, the tape remaining time

 

appears blinking when the tape is near its end, and the

 

battery pack remaining power indicator appears blinking

 

when the power is almost gone.

 

Page 17
Image 17
JVC GR-AXM217UM manual Stop Recording, Press Display Button

GR-AXM217UM specifications

The JVC GR-AXM217UM is a compact and versatile camcorder that gained recognition for its user-friendly design and impressive array of features, making it suitable for both novice and experienced videographers. This camcorder, released in the early 2000s, exemplifies the advancements in consumer video technology at the time, offering a balance of performance and ease of use.

One of the standout features of the GR-AXM217UM is its 700x Zoom capability, which allows users to capture distant subjects with remarkable clarity. This powerful zoom is complemented by a 32mm wide-angle lens that provides a broader perspective, making it ideal for various shooting scenarios, from expansive landscapes to close-up portraits.

The camcorder also boasts a Super VHS-C format, which enhances video quality significantly compared to standard VHS. The Super VHS-C tapes accommodate higher resolution video, ensuring that recordings are crisp and vibrant. This is particularly beneficial for preserving family memories or creating content that demands a higher standard of visual fidelity.

In terms of usability, the JVC GR-AXM217UM features a built-in image stabilizer, which is crucial for reducing the blurriness often associated with handheld shooting. This technology helps maintain steady footage, even in dynamic situations, allowing users to achieve professional-looking results with minimal effort.

Additionally, the camcorder comes equipped with a 3.5-inch color LCD screen that flips out, enabling users to easily monitor their recordings and adjust framing without difficulty. The intuitive interface allows for straightforward navigation through menus, making it accessible even for those new to video recording.

Audio quality is another essential aspect of the GR-AXM217UM, and it does not disappoint. The camcorder includes a built-in microphone and offers options for external microphone connections, catering to users who require enhanced audio fidelity for their projects.

In summary, the JVC GR-AXM217UM is a remarkable camcorder that combines high-quality video performance with user-friendly features. Its powerful zoom, Super VHS-C format, image stabilization technology, and convenient display make it a preferred choice for capturing life's moments with ease. Whether for personal use or creative endeavors, this camcorder continues to hold value for those looking to explore the world of video recording.