JVC GR-AXM217UM Allows you to set the current date and time pg, Recording pg, Lapse recording pg

32EN

RECORDING

AdvancedFeatures(cont.)

Menu Screen Available Using The MENU Button (cont.)

DATE/TIME	Allows you to set the current date and time (☞ pg. 11).
TAPE LENGTH	Allows you to set the tape length depending on the tape used (☞ pg. 12).
REC TIME	This feature allows you to set the parameters for Animation and Time-Lapse
	recording (☞ pg. 39).
INT. TIME	This feature allows you to set the parameters for Self-Timer (☞ pg. 38) and Time-
	Lapse recording (☞ pg. 38, 39).
TALLY LAMP	ON	The tally lamp comes on to signal the start of recording.
	OFF	The tally lamp remains off at all times.
TITLE LANG.	Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
	of Instant Titles (☞ pg. 29).
JLIP ID NO.	This number is necessary when connecting the camcorder to a device such as a computer
	using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
DEMO MODE	OFF	Automatic demonstration will not take place.
	ON	Demonstrates certain functions such as Fade/Wipe, etc. When
		“DEMO MODE” is set to “ON” and the Menu Screen is closed,
		the demonstration starts.

NOTES:

●When a tape whose Erase Protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available.

●By turning off the camcorder or inserting a tape whose Erase Protection tab is in the position that allows recording into it, “DEMO MODE” is set to “OFF” automatically.

●During the demonstration, all functions except zoom are disabled.

: Factory-preset