EN 41

1 3 2
IN OUT IN OUT IN OUT
ORIGINAL TAPE (camcorder)
EDITED TAPE (VCR)

AUTOMATIC EDITING TO VCR

ENGAGE VCR’S RECORD–PAUSEMODE
1
Point the remote control toward the VCR’s infrared
sensor and press VCR REC STBY, or manually
engage the VCR’s Record-Pause mode.
BEGIN AUTOMATIC EDITING
2
Press EDIT on the camcorder, and the previously
selected scenes are copied to the VCR in the
specified order.
While editing, the R.A. Edit counter of the scene
which is beging copied is shown with a blinking
highlight.
END AUTOMATIC EDITING
3
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units. To make the R.A. Edit
counter display disappear, press R.A.EDIT.
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
NOTES:
●

If you performed step 1

C

on page 39 (“MAKE

CONNECTIONS”), keep the remote control pointed at

the VCR during editing.

●

The on-screen display only appears while the

camcorder searches for each scene.

●

There may be noise at in- or out-points on the edited

tape with certain VCRs.

EDIT
R.A. EDIT
STOP