JVC GR-D247 manual Dubbing To a VCR, Editing EN, Cvbs Cable Adapter, Switch To VCR

MasterPage: Start_Right GR-D247PAL.book Page 35 Thursday, November 18, 2004 12:24 PM

EDITING EN 35

Dubbing To A VCR

To S/AV connector
S/AV cable	Open the cover.
	mark
(provided)

1 2 3 4

“Y/C”/“CVBS”	Cable
	Adapter*
Video Out Select
Switch

TV

To VCR

VCR

1 Following the illustrations, connect the camcorder and the VCR’s input connectors.

2 Start playback on the camcorder. (
pg. 20)

3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)

4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. (
pg. 13)

●To choose whether or not the following displays appear on the connected TV

•Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. (
pg. 22, 27)

•Time code

Set “TIME CODE” to “OFF” or “ON”. (
pg. 22, 27)

•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/ TV”. (
pg. 22, 27)

FEATURES

ATo S-VIDEO IN**

BYellow to VIDEO IN

CRed to AUDIO R IN

DWhite to AUDIO L IN

*If your VCR has a SCART connector, use the provided cable adapter. (The provided cable adapter accepts only output signals from this camcorder. To use this camcorder as a recorder, use a commercially available cable adapter.)

**Connect when your TV/VCR has an S-VIDEO IN connector. In this case, it is not necessary to connect the yellow video cable.

ADVANCED

NOTE:

Set the video out select switch of the cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable. CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/ video cable.