20 EN VIDEO RECORDING

NOTES:

●The time code cannot be reset.

●During fast-forwarding and rewinding, the time code indication does not move smoothly.

●The time code is displayed only when “TIME CODE” is set to “ON”. ( pg. 25)

Quick Review

Enables to check the end of the last recording.

1)Press QUICK REVIEW during the Recording-Standby mode.

2)Tape is rewound for about several seconds and played back automatically, then pauses in the Recording-Standby mode for the next shot.

● Distortion may occur at start of playback. This is normal.

Recording From The Middle Of A Tape

1)Play back a tape or use Blank Search

( pg. 21) to find the spot at which you want to start recording, then engage the Still Playback mode. ( pg. 21)

2)Set the Power Switch to “REC” while pressing down the Lock Button located on the switch, then start recording.