|
| VIDEO PLAYBACK EN 21 | |
Normal Playback |
| Once you release the button, normal playback | |
| resumes. | ||
|
| ● A slight mosaic effect appears on the display | |
5 VOL. +/– | during Shuttle Search. This is not a malfunction. | ||
4/9 | Lock Button | ATTENTION: | |
3 |
| During Shuttle Search, parts | |
|
| of the picture may not be | |
Speaker |
| clearly visible, particularly on | |
|
| the left side of the screen. | |
| MENU |
| |
8 |
| Blank Search | |
1 Load a cassette. ( pg. 17) | |||
Helps you find where you should start recording | |||
2 Set the Power Switch to “PLAY” while | in the middle of a tape to avoid time code | ||
pressing down the Lock Button located on the | interruption. ( pg. 19) | ||
switch. |
| 1 Load a cassette. ( pg. 17) | |
3 To start playback, press 4/9. | |||
2 Set the Power Switch to “PLAY” while | |||
4 To stop playback, press 8. | |||
pressing down the Lock Button located on the | |||
● During Stop mode, press 3 to rewind, or 5 | switch. | ||
to |
| 3 Press BLANK. | |
| To control the speaker volume | |||
● The “BLANK SEARCH” indication appears and | |||
Slide the Power Zoom Lever (VOL. | the camcorder automatically starts reverse or | ||
“+” to turn up the volume, or towards | forward search, then stops at the spot which is | ||
down the volume. |
| about 3 seconds of tape before the beginning of | |
NOTES: |
| the detected blank portion. | |
| ● To cancel Blank Search midway, press 8or | ||
● The playback picture can be viewed in the LCD | |||
| BLANK. | |||
monitor, viewfinder or on a connected TV. | NOTES: | ||
( pg. 22) |
| ||
● If Stop mode continues for 5 minutes when power | ● Before starting Blank Search, if the current | ||
is supplied from a battery, the camcorder shuts off | position is at a blank portion, the camcorder | ||
automatically. To turn on again, set the Power | searches in the reverse direction. If the current | ||
Switch to “OFF”, then to “PLAY”. | position is at a recorded portion, the camcorder | ||
● When a cable is connected to the AV connector, | searches in the forward direction. | ||
the sound is not heard from the speaker. | ● If the beginning or end of the tape is reached | ||
Still Playback |
| during Blank Search, the camcorder stops | |
| automatically. | ||
Pauses during video playback. | ● A blank portion which is shorter than 5 seconds of | ||
tape may not be detected. | |||
1) Press 4/9during playback. | |||
● The detected blank portion may be located | |||
2) To resume normal playback, press 4/9 | between recorded scenes. Before you start | ||
again. |
| recording, make sure there is no recorded scene | |
● If still playback continues for more than about | after the blank portion. | ||
3 minutes, the camcorder’s Stop mode is | Playback Snapshot | ||
automatically engaged. |
| ||
Shuttle Search |
| This camcorder allows you to take snapshots | |
Allows | during video playback. | ||
| Press SNAPSHOT. | |||
during video playback. |
|
| |
1)During playback, press 5for forward search, or 3for reverse search.
2)To resume normal playback, press 4/9.
●During playback, press and hold 5or 3. The search continues as long as you hold the button.
VIDEO RECORDING & PLAYBACK