26 EN MENUS FOR DETAILED ADJUSTMENT

Playback Menus

[ ] = Factory-preset

SOUND MODE and NARRATION

During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture.

According to the menu access explanation on page 23, select “SOUND MODE” or “NARRATION” from the Menu Screen and set it to the desired parameter.

The settings below are effective only for video playback except “BRIGHT” and “REC MODE”. The parameters (except “OFF” in ON SCREEN, SOUND MODE and NARRATION settings) are the same as in the description on ( pg. 24).

BRIGHT

pg. 16, “Brightness Adjustment Of The Display”.

DATE/TIME

[OFF] / ON

[OFF]: The date/time does not appear.

ON: The date/time is always displayed.

ON SCREEN

OFF / [LCD] / LCD/TV

 

 

When set to “OFF”, the camcorder’s display disappears.

TIME CODE

[OFF] / ON

 

 

pg. 19, “Time Code”

REC MODE

[SP*] / LP

Allows you to set the video recording mode (SP or LP) depending on your preference.

* SP indicator does not appear on the screen.

SOUND MODE

[STEREO ]: Sound is output on both “L” and “R” channels in stereo.

SOUND L : Sound from the “L” channel is output.

SOUND R : Sound from the “R” channel is output.

NARRATION

Although it is not possible to perform audio dubbing with this camcorder, you can hear sound from an audio-dubbed tape during playback using this function.

[OFF]: Original sound is output on both “L” and “R” channels in stereo.

ON: Dubbed sound is output on both “L” and “R” channels in stereo.

MIX: Original and dubbed sounds are combined and output in stereo on both “L” and “R” channels.