●Make sure to set “S/AV INPUT” to “OFF” in the Menu Screen (GR-D50/D30 only,  pg. 24).

●Set the video out select switch of the cable adapter as

required:

Y/C : When connecting to a TV or VCR which accepts

Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an S-Video cable and audio/video cable.

 

 

To AV *

 

 

Connector

 

 

cover**

 

To

 

 

S-VIDEO )

To EDIT (

 

Audio/Video cable

S-Video cable

 

(provided)

 

 

(optional)

 

 

 

 

To AUDIO, VIDEO*

 

 

and -IN

Editing cable***

 

connectors

 

 

“Y/C”/“CVBS”

 

If your VCR has the

video out

 

SCART connector,

select switch

 

use the provided

 

 

cable adapter.

To Remote PAUSE

 

 

or R.A.EDIT

 

VCR

 

 

To PAUSE IN $

 

 

 

4

TV

9

)

 

!

r

 

@

 

#

 

 

 

*Connect when an S-Video cable is not used.

**When connecting cables, open this cover.

***Provided with the optional Remote Control kit RM-V717KITU.

SELECT SCENES

4 Point the remote control at the camcorder’s remote sensor. Press PLAY (4) ) and then press R.A.EDIT ON/OFF r on the remote control.

The Random Assemble Editing Menu appears.

 

 

 

I N

OUT

MODE

Random

 

 

1 – – – – : – –

~

 

 

 

 

2

 

~

 

 

Assemble

 

 

3

 

~

 

 

Editing Menu

Programme

 

4

 

~

 

 

 

5

 

~

 

 

 

 

 

6

 

~

 

 

 

 

 

7

 

~

 

 

 

 

 

8

 

~

 

 

 

 

 

 

T I ME CODE

– – : – –

 

 

 

 

 

 

TOTAL

00 : 00

 

 

 

5 If using a Fade/Wipe at the beginning of the scene, press FADE/WIPE 9 on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

6 At the beginning of the scene, press EDIT IN/OUT

@on the remote control. The Edit-In position appears in the Random Assemble Editing Menu.

7 At the end of the scene, press EDIT IN/OUT @. The Edit-Out position appears in the Random Assemble Editing Menu.

8 If using a Fade/Wipe at the end of the scene, press FADE/WIPE 9.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•If you select a Fade/Wipe effect for an Edit-Out point, the effect is automatically applied to the following Edit-In point.

•When you use Fade/Wipe effects, that time is included in the total time.

9 If using Playback Special Effects, press EFFECT ! ( pg. 28).

10 Repeat steps 6 through 9 to register additional scenes.

•To change previously registered points, press CANCEL # on the remote control. The registered points disappear, one at a time, from the most recently registered point.

•If you are not using Fade/Wipe or Programme AE with special effects, repeat steps 6 and 7 only.

NOTES:

●When choosing a scene, set Edit-In and Edit-Out points so that there is a relatively large difference between them.

●If the search time for an in-point exceeds 5 minutes, the recording deck’s Record-Standby mode will be cancelled and editing will not take place.

●If there are blank portions before or after the Edit-In and Edit-Out points, a blue screen may be included in the edited version.

●Since time codes register time only as accurately as seconds, the time code total time may not match the total programme time exactly.

●Turning off the camcorder’s power erases all registered Edit-In and Edit-Out points.

Continued on next page.

EN

USING THE REMOTE CONTROL UNIT 31