CAMERA DISPLAY
●The “n” (CAMERA DISPLAY) settings are effective even when the Power Switch is set to “A”. However, the menu settings can be changed only when the Power Switch is set to “M”.
●The “n” (CAMERA DISPLAY) settings are effective only for shooting except “BRIGHT”.
[ ] =
pg. 9, “Brightness Adjustment Of The Display”
ON SCREENLCD: Keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV screen.
[LCD/TV]: Makes the camcorder’s display appear on screen when the camcorder is connected to a TV.
DATE/TIMEOFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5 seconds when the Power Switch is set from “OFF” to “A” or “M”. ON: The date/time is always displayed.
●The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control. ( pg. 17, 35)
TIME CODE[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. ( pg. 13)
CLOCK ADJ.
DSC
[ ] =
The Picture Quality mode can be selected to best match your needs. Two Picture Quality modes are available:
FINE ( 
) and STANDARD ( 
) (in order of quality).
NOTE:
The number of storable images depends on the selected picture quality as well as the composition of the subjects in the images and the type of memory card being used.
IMAGE SIZE640 x 480 / [1024 x 768]The Image Size mode can be selected to best match your needs. ( pg. 18)
NOTE:
The settings can be changed only when the VIDEO/ MEMORY Switch is set to “MEMORY”.
REC SELECT[ 
]: When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded only onto the tape.
/
: When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded not only onto the tape but also in the memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in CAMERA Menu is also applicable to memory card recording.