JVC GR-D63 Dubbing To A VCR, Y/C:, CVBS:, FEATURES, ADVANCED, EDITING EN, VIDEO/MEMORY, To use this camcorder as a player

EDITING EN 35

Dubbing To A VCR	To use this camcorder as a player
	1 Following the illustrations, connect the camcorder and
	the VCR. Also refer to page 17.
	2 Set the camcorder’s VIDEO/MEMORY Switch to
	“VIDEO”.
	3 Set the camcorder’s Power Switch to “PLAY” while
	pressing down the Lock Button located on the switch.

To AV	To S
Audio/Video	S-Video cable
cable	(optional)
(provided)

1 2 3 4

Cable Adapter*

“Y/C”/“CVBS” Video

Out Select Switch

To TV or VCR

4 Turn on the VCR’s power.

5 Insert the source cassette in the camcorder.

6 Insert the recording cassette in the VCR.

7 Engage the VCR’s AUX and Record-Pause modes.

●Refer to the instruction manual for the VCR.

8 Press 4/9 on the camcorder to start playback of the source tape.

9 At the point you want to start dubbing, engage the VCR’s Record mode.

10 To pause dubbing, engage the VCR’s Record- Pause mode and press 4/9 on the camcorder.

11 Repeat steps 8 – 10 for additional editing. Stop the VCR and camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. (
pg. 7)

●As the camcorder starts to play your footage, it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV

FEATURES

VCR

A White to AUDIO L IN B Red to AUDIO R IN C Yellow to VIDEO IN

DTo S-VIDEO IN**

TV	• Date/time
	Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
	( pg. 24, 28) Or, press DISPLAY on the remote control
	to turn on/off the date indication.
	• Time code
	Set “TIME CODE” to “OFF” or “ON”. ( pg. 24, 28)
	• Indications other than date/time and time code
	Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
	( pg. 24, 28)

ADVANCED

*If your VCR has a SCART connector, use the provided cable adapter. (The provided cable adapter accepts only output signals from this camcorder. To use this camcorder as a recorder, use a commercially available cable adapter.)

**Connect when your TV/VCR has an S-VIDEO IN connector. In this case, it is not necessary to connect the yellow video cable.

NOTE:

Set the video out select switch of the cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/ C signals and uses an S-Video cable.

CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.