Appears when the memory card’s memory is full and shooting is not possible.
COPYING FAILED●Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.
●Appears in the following cases when dubbing from a tape to a memory card (as digital stills):
•when no memory card is loaded.
•when the memory card’s memory is full.
•when the memory card is not formatted.
•when a
Appears if there is no memory card loaded when you attempt to record on a memory card or access data on a memory card.
PLEASE FORMATAppears when there is a problem with a memory card and its memory is corrupt, or it has not been initialised. Initialise the memory card. ( pg. 23)
NO IMAGES STOREDAppears if there are no image files stored in the memory card when you attempt memory card playback.
CARD ERROR!The error indications (E01, E02 or E06) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.
E03 or E04UNIT IN SAFEGUARD MODE EJECT AND REINSERT TAPEThe error indications (E03 or E04) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and
Appears when the camcorder does not recognise the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted.
UNSUPPORTED FILE!Appears when playing back a file that is not compatible with DCF or a file with a size that is not compatible with this camcorder.
CHECK CARD’S WRITE PROTECTION SWITCHAppears when you attempt to shoot digital still images when the write protection tab on the SD Memory Card is set to the “LOCK” position.