30 EN FEATURES FOR RECORDING WIPE/FADER

SNAPSHOT

 

MMENU/VOL.

OFF: Disables the function. (Factory-preset)

FADER–WHITE: Fade in or out with a white

 

Power Switch

screen.

FADER–BLACK: Fade in or out with a black

 

Lock Button

screen.

 

FADER–B.W: Fade in to a colour screen from a

 

black and white screen, or fade out from colour to black

 

and white.

 

WIPE–CORNER: Wipe in on a black screen from

 

the upper right to the lower left corner, or wipe out from

 

lower left to upper right, leaving a black screen.

 

WIPE–WINDOW: The scene starts in the centre of

 

a black screen and wipes in toward the corners, or

 

comes in from the corners, gradually wiping out to the

 

centre.

VIDEO/MEMORY

WIPE–SLIDE: Wipe in from right to left, or wipe out from left to right.

 

Wipe Or Fader Effects

 

 

 

WIPE–DOOR: Wipe in as the two halves of a black

 

 

 

screen open to the left and right, revealing the scene, or

 

 

 

 

wipe out and the black screen reappears from left and

 

 

 

IMPORTANT:

 

right to cover the scene.

Some Wipe/Fader Effects cannot be used with certain modes

 

 

 

WIPE–SCROLL: The scene wipes in from the

of Program AE with special effects. (See the right column.) If

 

bottom to the top of a black screen, or wipes out from top

an unusable Wipe/Fader Effect is selected, its indicator blinks

 

to bottom, leaving a black screen.

in blue or goes out.

 

 

 

WIPE–SHUTTER: Wipe in from the centre of a

 

 

 

These effects let you make pro-style scene transitions.

 

 

 

 

black screen toward the top and bottom, or wipe out from

Use them to spice up the transition from one scene to the

 

 

the top and bottom toward the centre leaving a black

next.

 

 

screen.

Wipe or Fader works when video recording is started or

 

 

 

 

 

stopped.

 

Program AE With Special Effects

 

1 Set the VIDEO/MEMORY Switch to “VIDEO”.

 

2 Set the Power Switch to “M” while pressing down the

 

 

 

 

 

IMPORTANT:

Lock Button located on the switch.

 

3 Open the LCD monitor fully. ( pg. 12)

 

Some modes of Program AE with special effects cannot be

 

used with certain Wipe/Fader effects. (See the left column.) If

4 Set “v” to the desired mode. ( pg. 24)

 

an unusable mode is selected, the indicator of Program AE

● The WIPE/FADER menu disappears and the effect is

 

with Special Effects blinks or goes out.

 

reserved.

 

1 Set the Power Switch to “M” while pressing down the

● The selected effect indicator appears.

 

Lock Button located on the switch.

5 Press the Recording Start/Stop Button to activate the

 

2 Open the LCD monitor fully. ( pg. 12)

Fade-in/out or Wipe-in/out.

 

3 Set “r” to the desired mode. ( pg. 24)

 

 

 

 

To deactivate the selected effect

Select “OFF” in step 4. The effect indicator disappears.

NOTE:

●The PROGRAM AE menu disappears and the selected effect is activated.

●The selected effect indicator appears.

You can extend the length of a Wipe or Fader by pressing and holding the Recording Start/Stop Button.

To deactivate the selected effect

Select “OFF” in step 3. The effect indicator disappears.

NOTES:

●Program AE with special effects can be changed during recording or during Record-Standby.

●Some modes of Program AE with special effects cannot be used during Night-Scope.