Remote sensor

VIDEO PLAYBACK EN 15

Playback Using The Remote Control

Buttons And Functions

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. ( pg. 16)

Installing The Battery

The remote control uses one lithium battery (CR2025).

1 Pull out the battery holder by inserting a pointed instrument into the slot.

2 Insert the battery in the holder, and be sure to have the “+” mark visible.

3 Slide the holder back in until you hear a click.

2 3

1

1

Slot

T

W

A Infrared beam transmitting window

 

 

The following buttons are available only when the

 

camcorder’s Power Switch is set to “PLAY”.

 

.....................................B AUDIO Button

( pg. 25, 28)

PLAYBACK

C PAUSE Button* ..........................................

( pg. 16)

Up Button ..................................................

( pg. 16)

D SLOW Rewind Button ................................

( pg. 16)

Beam Effective Area (indoor use)

When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s approximate effective distance for indoor use is 5 m (16 ft).

NOTE:

The transmitted beam may not be effective or may cause incorrect operation when the remote sensor

is directly exposed to sunlight or powerful lighting.

E REW Button* .......................................

( pg. 14,

20)

 

Left Button ................................................

( pg.

16)

&

F INSERT Button ..........................................

( pg.

37)

RECORDING

G STOP Button* ......................................

( pg. 14,

20)

Down Button .............................................

( pg.

16)

H SHIFT Button ............................................

( pg.

16)

I EFFECT ON/OFF Button ..........................

( pg.

16)

J EFFECT Button ........................................

( pg.

16)

VIDEO

K SLOW Forward Button...............................

( pg.

16)

L FF Button* ...........................................

( pg. 14,

20)

Right Button ..............................................

( pg.

16)

 

M PLAY Button* .......................................

( pg. 14,

20)

 

N A. DUB Button ...........................................

( pg.

37)

 

O DISPLAY Button .................................

( pg. 17,

34)

 

The following buttons are available when the camcorder’s Power Switch is set to “A” or “M”.

aS.SHOT (Snapshot) Button*

bSTART/STOP Button*

c Zoom (T/W) Buttons** ........................

( pg. 12, 16)

*Functions the same as each corresponding button on the camcorder. ( pg. 51)

**Functions when the camcorder’s Power Switch is set to “PLAY” as well.