Thread the strap through the eyelet.
GETTING STARTED EN 5

Provided Accessories

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the

 

 

camcorder as shown in the illustration.

 

NOTE:

or

To confirm the lens cap is on correctly make sure the cap is

 

flush to the camcorder.

Push.

6

90

2 4 3

w 5 e

T

W

aAC Adapter AP-V14U or AP-V15U

bBattery Pack BN-V408U-B

cAudio/Video Cable (ø3.5 mini-plug to RCA plug)

dCore Filter (for USB Cable and optional S-Video Cable.  pg. 6 for attachment)

eShoulder Strap (See the right column for attachment)

fCD-ROM

gMemory Card 8 MB (Already inserted in the camcorder)

hRemote Control Unit RM-V718U

iLithium Battery CR2025* (for remote control unit)

jUSB Cable

kLens Cap (See the right column for attachment)

*A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet.

NOTES:

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●Make sure to use the provided cables for connections. Do not use any other cables.

Place here during shooting.

How To Attach The Shoulder Strap

Follow the illustration.

1

2 Fold it back and thread it through the strap guide and the buckle.

●To adjust the length of the strap, loosen and then tighten the strap in the buckle.

3 Slide the strap guide fully towards the eyelet.

Strap guide

2

Buckle

3 1

Eyelet