24 EN ADDITIONAL FEATURES FOR D.S.C.

Resetting The File Name

By resetting the file name, a new folder will be made. The new files you are going to make will be stored in the new folder. It is convenient to separate the new files from previously made files.

1 Load a memory card. ( pg. 10)

2 Set the VIDEO/MEMORY Switch to “MEMORY”.

3 Set the Power Switch to “PLAY” while pressing down

Initializing A Memory Card

You can initialize a memory card anytime.

After initializing, all files and data stored in the memory card, including those which have been protected, are cleared.

1 Set the VIDEO/MEMORY Switch to “MEMORY”.

2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

the Lock Button located on the switch.

●A stored file is displayed.

4 Press the MMENU/VOL. Wheel in. The Menu Screen appears.

5 Rotate the MMENU/VOL. Wheel to select “NO. RESET”, and press it. The NO. RESET screen appears.

6 Rotate the MMENU/VOL. Wheel to select

3 Open the LCD monitor fully. ( pg.

4 Press the MMENU/VOL. Wheel in. The Menu Screen appears.

12)

MENU

PROTECT

DELETE DPOF

NO . RESET FORMAT

D I SPLAY

BR I GHT END

“EXECUTE”, and press it. The new folder (such as

“101JVCGR”) will be made and the file name of the next shot starts from DVC00001.

Folder and File names

Each time shooting takes place, a file name is made using a number which is larger by one than the largest number of the file names which are in use. Even if you delete an image or video clip file with a number in the

5 Rotate the MMENU/VOL. Wheel to select “FORMAT”, and press it. The FORMAT screen appears.

6 Rotate the MMENU/VOL. Wheel to select “EXECUTE”, and press it. The memory card is initialized.

FORMAT

ERASE ALL

EX I ST I NG DATA?

EXECUTE

RETURN

middle of range, the number will not be used for a new shot; a gap will remain in the numerical sequence. If the file name reaches DVC09999, a new folder (such as “101JVCGR”) will be made and the file name will start again from DVC00001.

●When initialization is finished, “NO IMAGES STORED” appears.

●To cancel initialization, select “RETURN”.

CAUTION:

Do not perform any other operation (such as turning off the camcorder) during initialization. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialization. If the memory card becomes corrupted initialize it.