20 EN, Slide the Power Zoom Lever towards T | JVC GR-DV1800 manual

20 EN

RECORDING Basic Recording For Video And D.S.C.

Zoom in (T: Telephoto)

1 x WT

10 x WT

20 x WT

40 x WT

Zoom out (W: Wide angle)

Zoom display

10 x WT

Digital zoom zone

10X (optical) zoom zone

Approximate zoom ratio

Power Zoom Lever

Power Switch

FEATURE: Zooming

PURPOSE:

To produce the zoom in/out effect, or an instantaneous change in image magnification.

OPERATION:

Zoom In

Slide the Power Zoom Lever towards “T”.

Zoom Out

Slide the Power Zoom Lever towards “W”.

The further you slide the Power Zoom Lever, the quicker the zoom action.

NOTES:

●Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standby,

lock the focus by using the manual focus

( pg. 25), then zoom in or out in Record mode.

●Zooming is possible to a maximum of 300X, or it

can be switched to 10X magnification using the optical zoom ( pg. 27).

●Zoom magnification of over 10X is done through Digital image processing, and is therefore called Digital Zoom.

●During Digital zoom, the quality of image may suffer.

●Digital zoom cannot be used in the following cases:

•When digital image processing, such as Picture Wipe/Dissolve ( pg. 32, 33) or Video Echo ( pg. 34, 35), is activated.

•When the Shooting Mode Switch is set to “UXGA” or “XGA/VGA” ( pg. 12).

•When “CAMERA MODE” is set to “DUAL” in the Menu Screen ( pg. 26, 27).

•When “CAMERA MODE” is set to “PS-VIDEO”

and “WIDE MODE” is set to “PS-WIDE” in the Menu Screen ( pg. 26, 27).

●Macro shooting (as close as approx. 5 cm to the subject) is possible when the Power Zoom Lever is set all the way to “W”. Also see “TELE MACRO” in the Menu Screen on page 28.

MENU Wheel

Image 20

JVC GR-DV1800 specifications 20 EN, Slide the Power Zoom Lever towards T, Zoom Out

Contents

GR-DV2000 GR-DV1800 Dear Customer It is recommended that you Some DO’S and DON’TS on the Safe USE of Equipment Hood with Camcorder’s lens Screw it Clockwise How To Attach The Lens HoodAlign the lens How To Attach Core Filter Release the stoppers on both ends of the Core Filter About Batteries PowerCharging the Battery Pack Using the Battery Pack Using AC PowerTo Detach The Battery Pack Approximate recording time Grip Adjustment Viewfinder AdjustmentShoulder Strap Attachment Tripod Mounting Date/Time Settings Built-in Clock’s Rechargeable Lithium Battery 10 EN Loading/Unloading a Cassette To Unload a Memory Card Loading a Memory CardEN11 Operation Mode Power Switch Position ManualShooting Mode Switch Position 12 EN Recording Mode Setting EN13 Go to step Picture Mode Setting14 EN Approximate number of storable images EN15Storage Capacity To Stop Recording To Adjust The Brightness Of The Display16 EN EN17 Journalistic ShootingInterface Shooting To turn the tally lamp or beep sounds off, pg Snapshot Mode Selection Snapshot For Video Recording Basic Shooting Snapshot Slide the Power Zoom Lever towards T 20 ENZoom Zoom Out Proper recording When a blank portion is recorded on a tapeEN21 Progressive Mode Recording To End Progressive Mode Recording Regular shooting of moving images Description of Progressive Scan CCDEN23 EN Recording Advanced Features For Video And D.S.C. Dual Shooting Feature Auto Focus Feature Manual FocusEN25 To obtain correct focus Using Menus For Detailed Adjustment If you have selected FADER/WIPE Program AE or W. BalanceSee pg SYSTEM, Display or DSC EN27 Menu Screen Explanations Refer to Self-Timer pg Video pg and Camera Mode is set to Video or PSVideo pg and Camera Mode is set to PS-VIDEO Refer to 5-Second Recording pg EN29 Self-Timer Instead of pressing the Recording Start/Stop Button Second RecordingEN31 Picture Wipe or Dissolve Selection Fade/Wipe EffectsFADE/WIPE Selection Menu Effect EN33Fader And Wipe Menu Programme AE With Special Effects To Deactivate The Selected ModePress PROG.AE again so that the effect indicator Disappears EN35 Sports Variable Shutter Speed 1/250 1/4000*1STROBE*2 Slow Slow Shutter*2 Exposure Control Iris Lock White Balance Adjustment Manual White Balance OperationEN37 To Return To Automatic White Balance 38 EN To Control The Speaker VolumeAvailable only with the remote control pg Playback Advanced Features For Video Display 40 ENPlayback Sound To cancel Blank Search midway Blank SearchEN41 Press Blank Search 42 EN Normal PlaybackAuto Playback Press Memory Play EN43 Index ScreenIndex Playback 44 EN Protecting ImagesTo Protect AN Image To Remove Protection Deleting Images EN45To Delete the Displayed Image To Delete ALL Images 46 EN Superimposing a Print FrameTo Make The Print Frame Disappear Press Print Frame You can initialise a memory card anytime Initialising a Memory CardEN47 48 EN Print Frame Deletion Perform steps 1 through 5 on pag EN49To Delete ALL Print Frames Setting Print Information Dpof Setting To Reset The Setting To Reset The No. Of Prints EN51To Print by Selecting Still Images and NO. of Prints Perform steps 1 through 5 on pg If your TV/VCR has a 21-pin connector 52 ENUse the provided Cable Adapter Camcorder EN53 Turn the camcorder’s Power Switch to While USB Mode Accessing File appears on54 EN Connection To a Personal Computer Make sure all units are turned off Connection To a Video Unit Equipped With a DV ConnectorEN55 56 EN Dubbing To a VCRTo use this camcorder as a player For GR-DV2000 owners only Dubbing From a VCR EN57To use this camcorder as a recorder GR-DV2000 only VCR Playback deck 58 EN Dubbing EN59 60 EN Dubbing Images Recorded On a Tape To a Memory Card Installing The Batteries EN61 Buttons 62 ENFunctions Feature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Zoom EN63 Feature Playback Special Effects 64 EN VCR Recording deck EN65SET REMOTE/VCR Code JVC VCR equipped with a remote pause connector 66 ENMake Connections VCR other than above EN67 Select Scenes 68 EN Automatic Editing to VCR For More Accurate Editing EN69Diagnosing VCR/CAMCORDER Timing Recording deck Adjustment of VCR/CAMCORDER Timing 70 EN Set 12BIT Mode to Sound 2 or MIX Menu Screen pg Audio DubbingEN71 To hear the dubbed sound during playback 72 EN Insert Editing Replace with new cassette Clean the lens and checkCorrective Action 74 EN Mode of Programme AE EN75Recording. The effects are Rapid panning Remove protection from 76 ENDo not try to use the Classic Camcorder When the LCD monitor’s EN77Displayed colours differ From those that are actually Blink 78 EN Press Memory Play to Subject to extremely high 10C to 35C pg Low temperatures LCD monitor LCD monitor’s Adjust the brightnessEN79 Recommended to charge it Charger does not light After Use Cleaning The Camcorder80 EN DC Input Connector DC pg Connect the editing cable when performingMulti Connector EN81 RtyE 82 EN EN83 Displays the Uxga mode Double or These indications also appear during Dual modeRotates while the tape is running VGA in order of quality EN85 Displays the sound mode LCD Monitor/Viewfinder Indications During Video PlaybackLCD Monitor/Viewfinder Indications During D.S.C. Playback Displays the brightness of the LCD monitor or Viewfinder EN87 Indications Function Switch is set to PossibleSnapshot is pressed Appears, the memory card is corrupted EN89 To avoid hazardsDuring use Store cassettes 90 EN Serious malfunctioning EN91About moisture condensation 92 EN EN93 Time Code pg , 29, 39 94 EN For GeneralFor Digital Video Camera For Digital Still Camera For Connectors EN95 GR-DV1800