JVC GR-DV1800 specifications 74 EN

74 EN			TROUBLESHOOTING (cont.)
		SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
	7.	The cassette will not load	7. • The cassette is in the wrong	7. • Set it in the right position
		properly.	position.	( pg. 10).
			• The battery’s charge is low.	• Install a fully charged
				battery ( pg. 6, 7).
	8.	The memory card will not	8. • The memory card is in the	8. • Set it in the right position
		load properly.	wrong position.	( pg. 11).
	9.	In the 5-Second mode,	9. • The 5-Second mode is set to	9. • Select “5S” in the Menu
		recording ends before	“ANIM.” in the Menu	Screen ( pg. 31).
		5 seconds have elapsed.	Screen.
	10.	Snapshot mode cannot be	10. • The Squeeze mode is	10. • Disengage the Squeeze
		used.	selected.	mode ( pg. 28).
	11.	The colour of Snapshot	11. • The light source or the	11. • Find a white subject and
		looks strange.	subject does not include	compose your shot so that it
			white. Or there are various	also appears in the frame
			different light sources behind	( pg. 18, 19).
			the subject.	• Turn off Sepia and
			• The Sepia or Monotone	Monotone ( pg. 34, 35).
			mode is activated.
	12.	The image taken using	12. • Shooting was performed	12. • Press the BACKLIGHT
		Snapshot is too dark.	under backlit conditions.	Button ( pg. 36).
	13.	The image taken using	13. • The subject is too bright.	13. • Set “PROGRAM AE” to
		Snapshot is too bright.		“SPOTLIGHT” in the Menu
				Screen ( pg. 34).
	14.	Digital Zoom does not	14. • 10X optical zoom is selected.	14. • Set “ZOOM” to “40X” or
		work.	• The Shooting Mode Switch is	“300X” in the Menu Screen
			set to “XGA/VGA” or	( pg. 27).
			“UXGA”.	• Set the Shooting Mode
			•“PROGRAM AE” is set to	Switch to “VIDEO”
			“VIDEO ECHO” in the Menu	( pg. 12, 20).
			Screen.	• Disengage the “VIDEO
			•“WIDE MODE” is set to “PS-	ECHO” mode ( pg. 20,
			WIDE” in the Menu Screen.	35).
			• Multi-Analyser 4 or Multi-	• Disengage the “PS-WIDE”
			Analyser 9 was attempted	mode ( pg. 28).
			during Digital Zoom.	• Disengage Multi-Analyser 4
			• Picture Wipe or Dissolve are	or Multi-Analyser 9
			being used in a scene	( pg. 18).
			transition.	• Wait until the Picture Wipe
				or Dissolve effects are
				completed ( pg. 20, 32).
	15.	Programme AE with	15. • The Power Switch is set to	15. • Set the Power Switch to
		special effects and Fade/	“ ”.	“ ” ( pg. 32, 34).
		Wipe Effects do not work.
	16.	The Black & White Fader	16. • The Sepia or Monotone	16. • Turn off Sepia and
		does not work.	mode is activated.	Monotone ( pg. 32, 34).