JVC GR-DV2000 specifications Dual Shooting, EN Recording Advanced Features For Video And D.S.C

Set “CAMERA MODE” to “DUAL” in the Menu Screen (
pg. 26, 27).

24 EN RECORDING Advanced Features For Video And D.S.C. (cont.)

Power Switch	Shooting
	Mode Switch
SNAPSHOT
Button

Lock Button

SNAPSHOT Button

Video image

Released position

Half-pressed

position

Still image

Fully-pressed

position

Dual Shooting

Lets you record images on a tape and store still images in a memory card simultaneously. In other words, it is possible to store still images in the memory card without interrupting image recording on the tape.

1 Set the Shooting Mode Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.

2

3 While recording to a tape, press SNAPSHOT halfway. A still image is displayed in the lower right corner of the screen where the video image being recorded is displayed.

•At this moment, if you release SNAPSHOT, snapshot recording will be cancelled.

4 Press SNAPSHOT fully. The displayed still image is stored in the memory card.

NOTES:

●If SNAPSHOT is pressed in the Record-Standby mode, only a still image is stored in the memory card. Video recording does not take place.

●If SNAPSHOT is pressed when “DIS” is set to “ON” (
pg. 27), the Stabiliser will be disabled.

●The Stabiliser is less effective in the DUAL mode than in other modes.

●Still images are stored in the memory card in VGA mode file size (
pg. 12).

●When “CAMERA MODE” is set to “DUAL”, all Fade/

Wipe Effects and some Programme AE with special effects cannot be used (
pg. 32 – 35).

●The optional flash (
pg. 3, 83) will not light during video recording.

FOCUS Ring FOCUS Button