Power Switch
EN57
Dubbing From A VCR
Connector cover**
To
AV
To
Audio/Video cable
To AUDIO, VIDEO* and
[To use this camcorder as a recorder]
1 Make sure all units are turned off, then connect the camcorder and the VCR as shown in the illustration. Also refer to pg. 52 and 53.
2 Set “SOUND MODE” to “12 BIT” or “16 BIT” and “REC MODE” to “SP” or “LP” in the Menu Screen depending on your preference ( pg. 39).
3 Set the camcorder’s Power Switch to “ 
” while pressing down the Lock Button located on the switch. Turn on the VCR’s power and insert the appropriate cassettes in the camcorder and the VCR.
4 Set “S/AV INPUT” to “ON” in the Menu Screen to engage the analogue input mode ( pg. 39).
5 Press the Recording Start/Stop Button on the camcorder to engage the
6 Engage the VCR’s Play mode, then engage the Still Playback mode when you have found a spot just before the
7 Press the Recording Start/Stop Button on the
camcorder to engage the Record mode. 
rotates on the screen. Engage the VCR’s Play mode.
8 To stop dubbing, press the Recording Star/Stop Button
on the camcorder so that 
stops rotating, then engage the VCR’s Stop mode.
VCR (Playback deck)
TV |
*Connect when an
**When connecting the cables, open this cover.
9 Repeat steps 6 through 8 for additional editing.
10 Set “S/AV INPUT” back to “OFF” in the Menu Screen to disengage the analogue input mode ( pg. 39).
NOTES:
●It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack ( pg. 7).
●Analogue signals can be converted to digital signals with this procedure.
●It is also possible to dub from another camcorder.
