4)Press the MENU Wheel in. The Menu Screen returns.

●Repeat the procedure if you wish to set other function menus.

5)Press the MENU Wheel in again. The Menu Screen closes.

WI PE / FADER

FADER–WH I TE

FADER–BLACK

FADER–B .W

WI PE–CORNER

WI PE–W I NDOW

WI PE–SL I DE

WI PE–DOOR

WI PE–SCROLL WI PE–SHUTTER

Wipe Or Fader EffectsIMPORTANT:

Some Wipe/Fader Effects cannot be used with certain modes of Program AE with special effects. ( pg. 33) If an unusable Wipe/Fader Effect is selected, its indicator blinks in blue or goes out.

NOTES:

●The “m” settings are effective when the Power Switch is set to both “A” and “M”. However, the menu settings can be changed only when the Power Switch is set to “M”.

●The “q” settings are effective only when the Power Switch is set to “M”.

●The “s” functions which are set when the Power Switch is set to “M” are also applied when the Power Switch is set to “PLAY”.

●The “n” (CAMERA DISPLAY) settings are effective even when the Power Switch is set to “A”. However, the menu settings can be changed only when the Power Switch is set to “M”.

●The “n” (CAMERA DISPLAY) settings are effective only for shooting except “BRIGHT”.

●The “n” (VIDEO DISPLAY) settings are effective only for video playback except “BRIGHT”.

●The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (provided). ( pg. 22, 52, 62)

These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next.

Wipe or Fader works when video recording is started or stopped.

1Set the VIDEO/MEMORY Switch to “VIDEO”.

2Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

3Open the LCD monitor fully, or pull out the viewfinder fully.

4Set “v” to the desired mode. ( pg. 31)

5To activate the Fade-in or Wipe-in, press FADE/ WIPE during Record-Standby mode.

● The selected effect indicator appears.

To activate the Fade-out or Wipe-out, press FADE/WIPE during recording.

●The selected effect indicator appears.

6Press the Recording Start/Stop Button to activate the Fade-in/out or Wipe-in/out.

To deactivate the selected effect…

Press FADE/WIPE again in step 6. The effect indicator disappears.

NOTE:

You can extend the length of a Wipe or Fader by pressing and holding the Recording Start/Stop Button.

WIPE/FADER

(Factory-preset: FADER–WHITE)

FADER–WHITE: Fade in or out with a white screen.

FADER–BLACK: Fade in or out with a black screen.

FADER–B.W: Fade in to a color screen from a black and white screen, or fade out from color to black and white.