.

Zoom ButtonsUp Button

 

SHIFT

Down Button

Left or SLOW

 

Rewind Button

PLAY

 

 

PAUSE

Right or SLOW

STOP

Forward Button

 

Slow-Motion Playback

Allows slow-speed search in either direction during video playback.

During normal video playback, press SLOW (YI or IU) more than approx. 2 seconds.

After approx. 5 minutes (approx. 20 seconds with an 80-minute cassete) in Slow Rewind or approx. 5 minutes in Slow Forward, normal playback resumes.

To pause Slow-Motion playback, press PAUSE (9).

To stop Slow-Motion playback, press PLAY (U).

NOTES:

You can also engage Slow-Motion Playback from Still Playback by pressing SLOW (YI or IU) more than approx. 2 seconds.

During Slow-Motion Playback, due to digital image processing, the picture may take on a mosaic effect.

After SLOW (YI or IU) is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.

There may be a small margin between the slow- motion playback start point you chose and the actual start point for Slow-Motion Playback.

During Slow-Motion Playback, there will be disturbances in video and the picture may seem unstable, especially with steady images. This is not a malfunction.

Frame-By-Frame Playback

Allows frame-by-frame search during video playback.

During normal or still playback, press SLOW (IU) repeatedly for forward or SLOW (YI) repeatedly for reverse. Each time SLOW (YI or IU) is pressed, the frame is played back.

Playback Zoom

Magnifies the recorded image up to 30X at any time during video playback and D.S.C. playback.

1) Press PLAY (U) to start video playback. Or perform normal playback of images.

2) At the point you want to zoom in, press the Zoom Button (T).

To zoom out, press the Zoom

Button (W).

3)You can move the image on the

screen around to find a particular portion of the picture. While holding down SHIFT, press Left L, Right F, Up U and Down E.

To end zoom, press and hold W until magnification returns to normal. Or, press STOP (8) and then press PLAY (U) during video playback.

NOTES:

Zoom can also be used during slow-motion and still playback.

Due to digital image processing, the quality of the image may suffer.

Playback Special Effects

Allows you to add creative effects to the video playback image.

The effects that can be used during playback are CLASSIC FILM, MONOTONE, SEPIA and STROBE. The effects work the same in playback as they did in recording. ( pg. 33)

CLASSIC FILM: Gives recorded scenes a strobe effect.

MONOTONE: Like classic black and white films, your footage is shot in B/W. Used together with the Cinema mode, it enhances the “classic film” effect.

SEPIA: Recorded scenes have a brownish tint like old photos. Combine this with the Cinema mode for a classic look.

STROBE: Your recording looks like a series of consecutive snapshots.

1)To start playback, press PLAY (U).

2)Press EFFECT. The PLAYBACK EFFECT Select Menu appears.

3)Press EFFECT repeatedly to move the highlight bar to the desired effect.

The selected function is activated and after 2 seconds the menu disappears.

To deactivate the selected effect, press EFFECT ON/OFF. To reactivate the selected effect press EFFECT ON/OFF again.

To change the selected effect, repeat from step 2 above.