EN 35

Zooming

ZOOM

(Factory-preset: 40X)

10X: When set to “10X” while using digital zoom, the zoom magnification will reset to 10X since digital zoom will be disengaged.

40X*: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 10X (the optical zoom limit), to a maximum of 40X digital magnification.

300X*: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 10X (the optical zoom limit), to a maximum of 300X digital magnification.

*Available only when the VIDEO/MEMORY Switch is set to “VIDEO”.

Snapshot mode for video recording

For details on the procedure, refer to “Snapshot (For Video Recording)” ( pg. 42). There is the sound effect of a shutter closing.

SNAP MODE

(Factory-preset: FULL)

FULL: Snapshot mode with no frame

NEGA: Nega mode

PIN-UP: Pin-Up mode

FRAME: Snapshot mode with frame

FULL NEGA PIN-UP FRAME
Gain up
GAIN UP

(Factory-preset: AGC)

OFF: Allows you to shoot dark scenes with no picture brightness adjustment.

AGC: The overall appearance may be grainy, but the image is bright.

AUTO : The shutter speed is automatically adjusted. Shooting a subject in low or poor lighting at slow shutter speed provides a brighter image than in the AGC mode, but the subject’s movements are not smooth or natural. The overall appearance may be grainy. While the shutter

speed is being automatically adjusted, “” is displayed.

Navigation time
NAVIGATION

(Factory-preset: MANUAL)

 

5SEC / 15SEC / 30SEC / 60SEC:

 

The captured image is stored in the memory card

 

as a thumbnail image when the recording time is

 

over the navigation time.

 

For example, “5SEC” is suitable to record short

 

scenes with the thumbnail images. ( pg. 48)

FEATURES

recommended.

 

However, the stored thumbnail images may take

 

up a lot of memory. In this case, using the

 

memory card with large capacity is

ADVANCED

MANUAL: Enables thumbnail images to be made

 

manually. ( pg. 49).