JVC GR-DVL155 specifications Select Scenes

EN 45

Programme
		I N	OUT MODE	Random Assemble
	1 – – – – : – – ~			Editing Menu

2~

3~

4~

5~

6~

7~

8~

T I ME CODE	– – : – –
TOTAL	0 0 : 0 0

Remote sensor

RM-V700U (optional)

SELECT SCENES

4 Point the remote control at the camcorder’s remote sensor. Press PLAY (4) and then press ON/ OFF on the remote control.

The Random Assemble Editing Menu appears.

5 At the beginning of the scene, press IN/OUT on the remote control. The Edit-In position appears in the Random Assemble Editing Menu.

6 At the end of the scene, press IN/OUT. The Edit- Out position appears in the Random Assemble Editing Menu.

7 Repeat steps 5 and 6 to register additional scenes.

•To change previously registered points, press CANCEL on the remote control. The registered points disappear, one at a time, from the most recently registered point.

NOTES:

● When choosing a scene, set Edit-In and Edit-Out points

so that there is a relatively large difference between

them.

● If the search time for an in-point exceeds 5 minutes, the

recording deck’s Record-Standby mode will be

cancelled and editing will not take place.

● If there are blank portions before or after the Edit-In and

Edit-Out points, a blue screen may be included in the

edited version.

● Since time codes register time only as accurately as

seconds, the time code total time may not match the

total programme time exactly.

● Turning off the camcorder’s power erases all registered

REW

PLAY

FF

Edit-In and Edit-Out points.

IN/OUT ON/OFF

CANCEL

CONTINUED ON NEXT PAGE