50
EN
NOTES:
●It is recommended to use the AC Adapter as the
power supply instead of the battery pack (墌 pg. 9).
●Never connect the PC connection cable and the DV
cable simultaneously to the camcorder. Connect
only the cable you wish to use to the camcorder.
●The date/time information cannot be captured into the
PC.
●Refer to the instruction manuals of the PC and
Software.
●The still images can also be transferred to a PC with a
DV connector-equipped capture board.
●When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable
depending on the type of DV connector (4 or 6 pins)
on the PC, or use the DV cable provided with the
capture board.
●The system may not work properly depending on the
PC or capture board you are using.
Connection To A Personal Computer
[A] Using PC connection cable
This camcorder can transfer still images to a PC by
using the optional software HS-V16KITE.
[B] Using DV cable
It is also possible to transfer still images to a PC with
a DV connector by using software equipped with the
PC or commercially available software.
1Make sure the camcorder and PC are turned off.
2Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3Turn the camcorder’s Power Switch to “PLAY”
while pressing down the Lock Button located on the
switch and turn on the PC.
•Refer to the instruction manual of the software on
how to transfer a still image to the PC.
4When finished, turn off the PC first, then the
camcorder.
To DV DV cable (optional) To DV
connector
Power Switch
PC with DV
connector
PC
Core filter
OR
Core filter
To
RS-232C
PC connection cable
(optional)
To PC
[A] Using PC connection cable
[B] Using DV cable