JVC GR-DVL220 specifications 40 EN, Remote control uses one lithium battery CR2025, Lock hole

40 EN USING THE REMOTE CONTROL UNIT

1

3

–	2
+
	+
	–

A

1

2

3 1

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible.

If you want to perform Random Assemble Editing (
pgs. 43 – 47), use the optional RM-V700U remote control.

Installing The Batteries (RM-V715U, provided)

The remote control uses two “AAA (R03)” size batteries. See “General Battery Precautions” (
pg. 59).

1Open the battery compartment cover as illustrated.

2 Insert two ”AAA (R03)” size batteries in the correct direction.

3 Replace the battery compartment cover.

Installing The Battery (RM-V700U, optional)

The remote control uses one lithium battery (CR2025).

B

2

Lock hole

3

1There are 2 ways to pull the battery holder out of the RM-V700U.

: Pull out the battery holder while sliding the lock hole.

: Pinch the release tab and pull out the battery holder.

2 Insert the battery in the holder, and be sure to

1

Knob

1

Remote sensor

have the “+” mark visible.

3 Slide the holder back in until you hear a click.

•Read the caution concerning lithium batteries in the RM-V700U instruction manual.

When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s approximate effective distance for indoor use is 5m (16ft).

The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.