EN
55
•This is a result of exceedingly high
contrast, and is not a malfunction.
•This is not a malfunction.
•“DATE/TIME” is set to “OFF” in the
Menu Screen.
•“TIME CODE” is set to “OFF” in the
Menu Screen.
•In places subject to low tempera-
ture, images become dark due to
the characteristics of the LCD
monitor. When this happens, the
displayed colors differ from those
that are actually recorded. This is
not a defect of the camcorder.
•When the LCD monitor's fluores-
cent light reaches the end of its
service life, images on the LCD
monitor become dark. Consult your
nearest JVC dealer.
•The light used to illuminate the LCD
monitor causes it to become hot.
•This may occur when the surface or
the edge of the LCD monitor is
pressed.
————
————
•Set “DATE/TIME” to “ON” in the
Menu Screen (墌 pg. 35).
•Set “TIME CODE” to “ON” in the
Menu Screen (墌 pg. 35, 36).
•Adjust the brightness and angle of
the LCD monitor (墌 pg. 15, 16).
•Close the LCD monitor to turn it off
or set the Power Switch to “OFF”,
and let the unit cool down.
————
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
%When shooting a subject
illuminated by bright light,
vertical lines appear.
^When the screen is under
direct sunlight during
shooting, the screen
becomes red or black for an
instant.
&During recording, the date/
time does not appear.
*Time code does not appear.
(Images on the LCD monitor
appear dark or whitish.
)The rear of the LCD monitor
is hot.
qThe indicators and the
image color on the LCD
monitor are not clear.
CONTINUED ON NEXT PAGE