JVC GR-DVL810A, GR-DVL315A, GR-DVL610SH 56 EN, Dubbing Images Recorded On a Tape To a Memory Card

Select the Snapshot mode in the Menu Screen (
pg. 26) to use for dubbing the image to the memory card.

56 EN

SNAPSHOT Button

Lock Button

Power Switch

Display

Menu Screen

COPY – OF F

ON

SP 6

Play/Pause Button (4/6)

MENU/

BRIGHT Wheel

DUBBING (cont.)

Dubbing Images Recorded On A Tape To A Memory Card

(GR-DVL810A/DVL710A/DVL610A/DVL610SH only)

Images can be dubbed from a tape to a memory card .

1 Load a memory card (
pg. 14) and cassette (
pg. 12).

2

3 Set the VIDEO/DSC Switch to “VIDEO”, then set the

Power Switch to “ ” while pressing down the Lock Button.

4 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate it to select “ VIDEO” and press it. The VIDEO Menu appears.

5 Rotate the MENU/BRIGHT wheel to select

“ COPY” and press it. The Sub Menu appears. Rotate it to select “ON” and press it. Selection is complete.

6 Rotate the MENU/BRIGHT wheel to select “1RETURN” and press it twice. The normal playback screen resumes.

7 To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.

8 To start dubbing, press SNAPSHOT. The selected image is stored in the memory card.

•“” blinks during dubbing.

NOTES:

●If SNAPSHOT is pressed in step 8 when a memory card is not loaded, the message “COPYING FAILED” is displayed.

●If an image recorded on the tape using the WIDE mode (
pg. 48) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.

●To use Playback Special Effects with a video image you

wish to dub, perform up to step 8 using the remote control (provided) (
pg. 59).

VIDEO/DSC Switch (Open the LCD monitor to access this switch.)