JVC GR-DVL610A, GR-DVL315A, GR-DVL810A, GR-DVL610SH, GR-DVL710A EN83, Indications Function

EN83

Warning Indications

Indications	Function
	Displays the battery remaining power.
	Remaining power level: high
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator			blinks.
	When the battery power is exhausted, power turns off automatically.
	Appears when no tape is loaded.		( pg. 12)
CHECK TAPE’S ERASE	Appears when the erase protection tab is set to “SAVE” while the Power
	Switch is set to “ ” or “ ” and the VIDEO/DSC Switch (GR-DVL810A/
PROTECTION TAB
	DVL710A/DVL610A/DVL610SH only) is set to “VIDEO”.		( pg. 12)
	Appears if dirt is detected on the heads during recording. Use an optional
HEAD CLEANING	cleaning cassette.		( pg. 86)
REQUIRED USE
CLEANING CASSETTE
	Appears if condensation occurs. When this indication is displayed, wait
CONDENSATION	more than 1 hour until condensation disappears.
OPERATION PAUSED
PLEASE WAIT
	Appears if a tape is not loaded when the Recording Start/Stop Button or
TAPE!	SNAPSHOT Button is pressed while the Power Switch is set to “ ” or
	“ ” and the VIDEO/DSC Switch (GR-DVL810A/DVL710A/DVL610A/
	DVL610SH only) is set to “VIDEO”.
TAPE END	Appears when the tape ends during recording or playback.		( pg. 71)
DIFFERENT	Appears if a tape in another format is loaded.
FORMATTED TAPE
	● Appears when the date/time is not set.		( pg. 11)
SET DATE/TIME!	● Appears when the built-in clock battery runs out and the previously set
	date/time is erased. Consult your nearest JVC dealer for replacement.
LENS CAP	Appears for 5 seconds after power is turned on if the lens cap is attached.
A. DUB ERROR!	Appears if Audio Dubbing is attempted on a blank portion of a tape.
			( pg. 66)
A. DUB ERROR!	● Appears if Audio Dubbing is attempted on a tape recorded in the LP
<CANNOT DUB	mode.		( pg. 66)
ON A LP RECORDED	● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit
TAPE>	audio.		( pg. 66)
<CANNOT DUB
	● Appears if A. DUB (e) on the remote control is pressed when the erase
ON A 16BIT
	protection tab is set to “SAVE”.		( pg. 66)
RECORDING>
<CHECK TAPE’S ERASE
PROTECTION TAB>
		CONTINUED ON NEXT PAGE