JVC GR-DVL505, GR-DVL805 specifications 64 EN, Troubleshooting

64 EN TROUBLESHOOTING (cont.)

SYMPTOM

15.The Picture Wipe and Dissolve functions do not work.

16.The picture wipe function does not work.

17.Scene transition does not go as expected.

18.The Video Echo mode does not work.

POSSIBLE CAUSES	CORRECTIVE ACTION
15. • The last selected editing	15. •Select Picture Wipe or
scene is ending.	Dissolve before beginning
• At the end of the last	recording. The effects are
selected scene for editing,	then automatically activated
the Power Switch was set to	( pg. 28).
“OFF”.	•Do not turn off the
• The power is off.	camcorder’s power after
	setting Edit-In and Edit-Out
	points, as they will all be
	erased ( pg. 28).
	•The camcorder automati-
	cally shuts off after 5
	minutes have elapsed in the
	Record-Standby mode.
	Make sure you continue
	operations within 5 minutes
	after engaging Record-
	Standby mode ( pg. 28).
16 • The Slow Shutter mode is	16. •Disengage the Slow Shutter
activated.	mode or set “WIDE MODE”
• “WIDE MODE” is not set to	to “OFF” before preparing
“OFF”.	to use the Picture Wipe
	( pg. 26, 28, 30).
17. • When using “Picture Wipe/	17.
Dissolve” ( pg. 28), there
is a delay of a fraction of a
second between the
previous record stop-point
and the Dissolve start-point.	————
This is normal, but this slight
delay becomes especially
noticeable when shooting
fast-moving subject or
during rapid panning.
18. • The Picture Wipe or	18. •Set “WIDE MODE” to
Dissolve functions are in use.	“CINEMA” or “OFF” mode
• “WIDE MODE” is set to	( pg. 26).
“SQUEEZE” in the Menu	•Do not try to use the Video
Screen.	Echo mode during a Fade-In
• A Fade-In or Fade-Out is in	or Fade-Out ( pg. 28, 30).
progress.