48 EN
P
L
A
Y
O
F
F
T
PO
USC
HOP
SY
TAT
RO
T/T
SA
TP
OE
P
R
4
E
4
C
4
Power Switch
Rewind Button (
2
)
Fast-Forward
Button (
3
)
Lock Button

Dubbing Images Stored In The Built-in

Memory To A Tape

Images can be dubbed from the camcorder’s built-in
memory to a tape.
1
Load a cassette ( pg. 12).
2
To locate the point where you wish to dub a still
image, play back the tape. Stop playback at the
desired point.
3
2Set the VIDEO/DSC Switch to “ ”, then set the
Power Switch to “ ” while pressing down the
Lock Button located on the switch.
4
3To select a still image to be dubbed, perform Index
Playback ( pg. 37) or press
2
or
3
to select the
image you wish.
5
To engage Dub-Standby, press the Recording Start/
Stop Button. The message “TO COPY TO TAPE PUSH
START/STOP” appears.
6
While the message is being displayed, press the
Recording Start/Stop Button. The selected still image
is recorded on the tape for approx. 5 seconds.
•The indicator disappears when dubbing is
complete.
NOTE:

If the Recording Start/Stop Button is pressed in step 5 when

the tape’s erase protection tab is set to “SAVE”, the

message “COPYING FAILED” is displayed.

Display
DUBBING

(cont.)

Recording
Start/Stop Button
VIDEO/DSC Switch (Open the
LCD monitor to access this switch.)