EN 61
Recording Start/Stop
Button
1 |
| I N | OUT MODE | Random Assemble | |||
| 00 : 2 5 ~ 02 : 0 5 – – – – | Editing Menu | |||||
2 – – 0 7 : 1 8 ~ 08 : 3 1 – – – – | |||||||
| |||||||
3 – – 0 3 : 3 3 ~ 05 : 5 3 |
|
|
| ||||
4 |
| 0 9 : 3 0 | ~ 13 : 1 5 |
|
|
| |
|
|
|
| ||||
5 |
| 15 : 5 5 | ~ 16 : 2 9 – – – – |
| |||
6 – – | – | ~ |
|
|
| ||
7~
8~
T I ME CODE | 1 6 | : 3 0 |
TOTAL | 9 | : 3 9 |
Remote Sensor
PAUSE
R.A.EDIT
ON/OFF
VCR REC STBY 
ON/OFF
OR | ||
(Provided with |
| (optional) |
|
|
AUTOMATIC EDITING TO VCR
11Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE (6).
12 Point the remote control towards the VCR’s remote sensor and press VCR REC STBY (q6), or manually engage the VCR’s
13 Press the Recording Start/Stop Button on the camcorder. Editing proceeds as programed, right through to the end of the last registered scene.
•When dubbing is complete, the camcorder enters the Pause mode, and the VCR enters its Record- Pause mode.
•If you do not register an
•If you operate the camcorder during automatic editing, the VCR will enter its
14 Engage the Stop modes for the camcorder and the VCR.
To make the R.A.Edit counter display disappear, press R.A.EDIT ON/OFF or ON/OFF on the remote control.
NOTES:
●Pressing R.A.EDIT ON/OFF or ON/OFF on the remote control clears all settings registered during Random Assemble Editing.
●When the editing cable is connected to the remote control’s Pause In connector during dubbing, make sure the remote control is pointed at the VCR’s sensor, and the path between the two is unobstructed.
●Random Assemble Editing may not function properly
when using a tape including several duplicated time codes ( pg. 20).
CONTINUED ON NEXT PAGE
