JVC GR-DVL725 36 EN, Program AE With Special Effects, To Deactivate Night-Alive

36 EN FOR RECORDING

NOTES:

●During Night-Alive, the following functions or settings cannot be activated and its indicator blinks or goes out:

•Some modes of “Program AE With Special Effects” (
pg. 36, 37).

•“GAIN UP” in the CAMERA Menu
( pg. 45).

•“DIS” in the MANUAL Menu
( pg. 45).

•“Video light” whenLIGHT OFF/AUTO/ON is set to “AUTO”
( pg. 19).

●During Night-Alive, it may be difficult to bring the camcorder into focus. To prevent this, use of manual focus and/or a tripod is recommended.

MENU/BRIGHT Wheel

Lock Button

Power Switch

NIGHT Button

Display



SHUT TER1/100

SPORTS

SNOW

SPOT L I GHT

TW I L I GHT

SEP I A

MONOTONE

CLASS I C F I LM

STROBE



Night-Alive

Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed.

1 Set the Power Switch to “	” while pressing
MANUAL

down the Lock Button located on the switch.

2 Press NIGHT so that the Night-Alive indicator “ ”appears.

•The shutter speed is automatically adjusted to provide up to 30 times sensitivity.

•“A” appears beside “ ” while the shutter speed is being automatically adjusted.

To Deactivate Night-Alive . . .

..... press NIGHT again so that the Night-Alive

indicator disappears.

Program AE With Special Effects

1 Set the Power Switch to “	” while pressing
MANUAL

down the Lock Button located on the switch.

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3 Rotate the MENU/BRIGHT wheel to select “ PROGRAM AE”, then press it.

4 Rotate the MENU/BRIGHT wheel to select the desired mode (
pg. 37), then press it. Selection is complete. Press the MENU/BRIGHT wheel in again. The Menu Screen closes.

•The PROGRAM AE Menu disappears and the selected mode is activated. The selected mode indicator appears.

To Deactivate The Selected Mode . . .

..... select “OFF” in step4.

NOTES:

●Program AE with special effects can be changed during recording or during Record-Standby.

●Some modes of Program AE special effects cannot be used during Night-Alive.

IMPORTANT

Some modes of Program AE with special effects cannot be used with certain Fade/Wipe Effects (
pg. 38, 39). If an unusable mode is selected, its indicator blinks or goes out.