JVC GR-DVL725 Make sure all units are turned off, Connect the camcorder to a TV or VCR as shown

	EN 23
1 Make sure all units are turned off.	NOTES:
	● It is recommended to use the AC Adapter as the
2 Connect the camcorder to a TV or VCR as shown	power supply instead of the battery pack ( pg. 9).
in the illustration ( pg. 22).	● The S-Video cable is optional. Be sure to use the
	YTU94146A S-Video cable.
If using a VCR . . . go to step 3.
	Consult the JVC Service Center described on the
If not . . . go to step 4.
	sheet included in the package for details on its
3 Connect the VCR output to the TV input, referring
	availability. Make sure to connect the end with a
	core filter to the camcorder. The core filter reduces
to your VCR’s instruction manual.
	interference.
4 Turn on the camcorder, the VCR and the TV.
	● To monitor the picture and sound from the camcorder
5 Set the VCR to its AUX input mode, and set the	without inserting a tape or memory card, set the
	camcorder’s Power Switch to “AUTO ” or “MANUAL ”,
TV to its VIDEO mode.	then set your TV to the appropriate input mode.
To choose whether or not the following displays	● Make sure you adjust the TV sound volume to its
	minimum level to avoid a sudden burst of sound when
appear on the connected TV . . .	the camcorder is turned on.
• Date/Time	● If you have a TV or speakers that are not specially

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the shielded, do not place the speakers adjacent to the TV

Menu Screen ( pg. 48).	as interference will occur in the camcorder playback
Or, press DISPLAY on the remote control	picture.
(provided with GR-DVL820 only) to turn on/off	● If no image is displayed or no sound is heard from the
the date indication.	TV, set “S/AV INPUT” to “OFF” in the Menu Screen
• Time Code	(GR-DVL820 only, pg. 48).
..... set “TIME CODE” to “ON” or “OFF” in the Menu	● While the Audio/Video cable is connected to the AV
Screen ( pg. 48).	connector, sound cannot be heard from the speaker.
• Playback Sound Mode, Tape Speed And Tape
Running Displays for tape playback
..... set “ON SCREEN” to “LCD” or “LCD/TV” in the
Menu Screen ( pg. 48).