42 EN | FOR RECORDING (cont.) |
Exposure Control
Manual exposure adjustment is recommended in the following situations:
•When shooting using reverse lighting or when the background is too bright.
•When shooting on a reflective natural background such as at the beach or when skiing.
•When the background is overly dark or the subject light.
1 Set the Power Switch to “ | ” while pressing |
MANUAL |
|
down the Lock Button located on the switch.
2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.
3 Rotate the MENU/BRIGHT wheel to select “
EXPOSURE”, then press it.
4 Rotate the MENU/BRIGHT wheel to select “MANUAL”, then press it. The Menu Screen disappears. The exposure control indicator appears.
5 Rotate the MENU/BRIGHT wheel towards “+” to brighten the image, or towards
6 Press the MENU/BRIGHT wheel in. Exposure adjustment is complete.
To Return To Automatic Exposure Control . . .
..... select “AUTO” in step4. Or, set the Power Switch
to “ | ”. |
|
|
AUTO |
|
|
|
To Brighten The Subject Quickly . . . | |||
..... press BACKLIGHT. |
| is displayed and the | |
subject is brightened. If pressed again, 
disappears and the brightness returns to the previous level.
•+3 exposure has the same effect as the BACKLIGHT Button.
•Using BACKLIGHT may cause the light around the subject to become too bright and the subject to become white.
•Backlight compensations is also available when the
Power Switch is set to “ | ”. |
AUTO |
|
NOTE:
You cannot use the manual exposure control at the same time with backlight, spotlight ( pg. 37) compensation and “SNOW”( pg. 37).
Iris Lock
Use this function in the following situations:
•When shooting a moving subject.
•When the distance to the subject changes (so its size in the LCD monitor or the viewfinder changes), such as when the subject is backing away.
•When shooting on a reflective natural background such as at the beach or when skiing.
•When shooting objects under a spotlight.
•When zooming.
When the subject is close, keep the iris locked. Even when the subject moves away from you, the image will not darken or brighten.
Before the following steps, perform steps 1 through 4 of “Exposure Control”.
5 Adjust zoom so that the subject fills the LCD monitor or the viewfinder, then press and hold the MENU/BRIGHT wheel for over 2 seconds. The exposure control indicator and “ ” appear.
Press the MENU/BRIGHT wheel in. “ ” changes to “ ” and the iris is locked.
Iris lock indicator
3
MENU/BRIGHT Wheel
BACKLIGHT Button (5)
Power Switch
To Return To Automatic Iris Control . . .
..... rotate MENU/BRIGHT to display “AUTO” then
press it in step 4. The exposure control indicator and “ ” disappear. Or, set the Power switch to
“ | ”. |
AUTO |
|
To Lock The Exposure Control And The Iris . . .
..... after step 4 of “Exposure Control”, adjust the
exposure rotating the MENU/BRIGHT wheel. Then lock the iris in step 5 of “Iris Lock”. For automatic locking, rotate the MENU/BRIGHT wheel to select “AUTO”, then press it in step4. The iris becomes automatic after about 2 seconds.
Iris
Like the pupil of the human eye, it contracts in
