Make sure the camcorder’s power is off.

14 EN

GETTING STARTED (cont.)

Label

Card Cover

Clipped edge

MENU/BRIGHT Wheel

 

Power Switch

 

 

Display

 

 

QUAL I TY

–

F I NE

Lock Button

I MAGE S I ZE

–

1024X768

REC SELECT –

 

 

 

Power Lamp

 

 

 

 

RETURN

 

 

Memory card

Loading A Memory Card

The provided memory card is already inserted in the camcorder when you receive the camcorder.

1

2 Press PUSH OPEN and open the LCD monitor, then open the card cover (MEMORY CARD).

3 Insert the memory card clipped edge first.

•Do not touch the terminal on the reverse side of the label.

4 To close the card cover, push it until you hear a click.

To Unload A Memory Card . . .

..... in step 3 push the memory card, which then

comes out of the camcorder automatically. Pull it out and close the card cover.

NOTES:

●Be sure to use only SD Memory Cards marked

“” or MultiMediaCards marked

“”.

●Some brands of memory cards are not compatible with this camcorder. Before purchasing a memory card , consult its manufacturer or dealer.

●Before using a new memory card, it is necessary to FORMAT the card.  pg. 34.

ATTENTION

Do not insert/remove the memory card while the camcorder is turned on, as this may cause the memory card to be corrupted or cause the camcorder to become unable to recognize whether or not the card is installed.

Picture Quality/Image Size Setting

The Picture Quality/Image Size can be selected to best match your needs. Refer to the chart on page 27 for your selection.

1 Set the VIDEO/MEMORY Switch to “MEMORY”,

then set the Power Switch to “

” while pressing

MANUAL

 

down the Lock Button located on the switch. The power lamp lights and the camcorder turns on.

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3 Rotate the MENU/BRIGHT wheel to select DSC” and press it. The DSC Menu appears.

4 Rotate the MENU/BRIGHT wheel to select “QUALITY” and press it. The Sub Menu appears. Rotate the MENU/BRIGHT wheel to select the desired mode and press it.

5 Rotate the MENU/BRIGHT wheel to select “IMAGE SIZE” and press it. The Sub Menu appears. Rotate the MENU/BRIGHT wheel to select the desired mode and press it.

6 Rotate the MENU/BRIGHT wheel to select

“ RETURN”, and press it twice. The Menu Screen closes.