CHECK TAPE’S ERASE
PROTECTION TAB
HEAD CLEANING
REQUIRED USE
CLEANING CASSETTE
CONDENSATION
OPERATION PAUSED
PLEASE WAIT
TAPE!
TAPE END
DIFFERENT
FORMATTED TAPE
SET DATE/TIME!
LENS CAP
A. DUB ERROR!
A. DUB ERROR!
<CANNOT DUB
ON A LP RECORDED TAPE>
<CANNOT DUB
ON A 16BIT
RECORDING>
<CHECK TAPE’S ERASE
PROTECTION TAB>
EN 85
FunctionDisplays the battery remaining power. Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator 
blinks. When the battery power is exhausted, power turns off automatically.
Appears when no tape is loaded.( pg. 12)
Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “ AUTO ” or “ MANUAL ” and the VIDEO/MEMORY Switch is set
to “VIDEO”. | ( pg. 12) |
Appears if dirt is detected on the heads during recording or playback. | |
Use an optional cleaning cassette. | ( pg. 76) |
Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.
Appears if a tape is not loaded when the Recording Start/Stop Button or
SNAPSHOT Button is pressed while the Power Switch is set to “ | AUTO | ” or | ||
“ | MANUAL | ” and the VIDEO/MEMORY Switch is set to “VIDEO”. |
|
|
|
|
| ||
Appears when the tape ends during recording or playback. | ( pg. 67) | |||
Appears if a tape in another format is loaded when the VIDEO/MEMORY Switch is set to “VIDEO”.
● Appears when the date/time is not set. | ( pg. 11) |
●Appears when the
Appears for 5 seconds after power is turned on if the lens cap is attached.
Appears if Audio Dubbing is attempted on a blank portion of a tape.
( pg. 63)
●Appears if Audio Dubbing is attempted on a tape recorded in the LP mode. ( pg. 63)
●Appears if Audio Dubbing is attempted on a tape recorded in
●Appears if A. DUB (e) on the remote control is pressed when the erase
protection tab is set to “SAVE”. | ( pg. 63) |
CONTINUED ON NEXT PAGE