6 EN

AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO

MENU/BRIGHT Wheel

 

MODE” is set to “ON” (factory-preset).

 

Automatic Demonstration starts when there is no operation for

 

AUTO

” or

about 3 minutes after the Power Switch is set to “

MANUAL

” and no cassette is in the camcorder.

 

“

 

 Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.

 “DEMO MODE” remains “ON” even if the camcorder power is turned off. To cancel Automatic Demonstration:
1. Set the Power Switch to “

” while pressing down the

MANUAL

 

Lock Button located on the switch and press the MENU/ BRIGHT wheel in. The Menu Screen appears.

2. Rotate the MENU/BRIGHT wheel to select “ SYSTEM” and press it. The SYSTEM Menu appears.

3.Rotate the MENU/BRIGHT wheel to select “DEMO MODE” and press it. The Sub Menu appears.

4.Rotate the MENU/BRIGHT wheel to select “OFF” and press it.

5. Rotate the MENU/BRIGHT wheel to select “ RETURN”, and press it twice. The normal screen appears.

NOTE:

Power Switch

Lock Button

Sub Menu

DEMO MODE – OF F

ON

If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.

NOTE:

To confirm the lens cap is on correctly make sure the cap is flush to the camera.

1

2

3

The lens cap can be attached only when the lens hood is attached to the camcorder.