EN 13
MENU/BRIGHT Wheel
Power Lamp
Power Switch |
Lock Button
Display
|
|
|
|
| Menu Screen | |
| REC MODE | – | SP | |||
|
|
| ||||
|
|
| LP |
|
| |
|
|
|
|
|
| Sub Menu |
|
|
|
|
|
| |
|
|
|
|
|
|
|
Recording Mode Setting
Set the tape recording mode depending on your preference.
1 Set the Power Switch to “ | ” while pressing |
MANUAL |
|
down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on.
2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.
3 Rotate the MENU/BRIGHT wheel to select
“CAMERA” and press it. The CAMERA Menu appears.
4 Rotate the MENU/BRIGHT wheel to select “REC MODE” and press it. The Sub Menu appears. Select “SP” or “LP” by rotating the MENU/BRIGHT wheel and press it. Rotate the MENU/BRIGHT wheel to select “
RETURN”, and press it twice. The Menu Screen closes.
•Audio Dubbing ( pg. 63) and Insert Editing
( pg. 64) are possible on tapes recorded in the SP mode.
•“LP” (Long Play) is more economical, providing
1.5times the recording time.
NOTES:
●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.
●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.
●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.
