EN
73
•A malfunction of some kind has
occurred. In this case the
camcorder’s functions become
unusable.
•The temperature of the battery is
extremely high/low.
•Charging is difficult in places
subject to extremely high/low
temperatures.
•This is not a malfunction.
•The DV cable was plugged/
unplugged with power turned on.
————
•Eject the cassette once and re-
insert it, then check if the indication
clears. When it does, you can
resume using the camcorder. If the
indication remains even though
you repeat the above two or three
times, please consult your nearest
JVC dealer.
•To protect the battery, it is
recommended to charge it in
places with a temperature of 10°C
to 35°C (墌 pg. 75).
•By recording with “DIS” activated
(墌 pg. 47) this can be avoided.
•Turn the camcorder’s power off
and on again, then operate it.
•Push in the memory card a few
more times (墌 pg. 14).
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
TAn error indication
(E03 or E04) appears.
YThe charger indicator on
the camcorder does not
light.
UWhen the image is printed
from the printer, a black bar
appears at the bottom of
the screen.
IWhen the camcorder is
connected via the DV
connector, the camcorder
does not operate.
OThe memory card cannot
be removed from the
camcorder.