52 EN | DUBBING |
Power Switch
To
S-VIDEO
Connector cover*
To AV
Audio/Video cable
To AUDIO, VIDEO**
and 
Dubbing To A VCR
1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 22 and 23.
2 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.
3 Engage the VCR’s AUX and
4 Engage the camcorder’s Play mode to find a spot just before the
5 Press 4/6 on the camcorder and engage the VCR’s Record mode.
6 Engage the VCR’s
7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.
NOTES:
● As the camcorder starts to play your footage it will |
appear on your TV. This will confirm the connections |
and the AUX channel for dubbing purposes. |
● Before you start dubbing, make sure that the indications |
“Y/C”/“CVBS” |
| Cable Adapter (provided) | |
video out |
| ||
| If your VCR has a SCART | ||
select switch |
|
| |
|
| connector, use the | |
|
|
| |
|
|
| provided cable adapter. |
|
|
|
|
VCR | TV |
|
*When connecting the cables, open this cover.
**Connect when an
do not appear on the connected TV. If they do, they are |
being recorded onto the new tape. |
● Set the video out select switch of the cable adapter as |
required: |
Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
To choose whether or not the following displays appear on the connected TV . . .
• Date/Time
..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in
the Menu Screen ( pg. 50).
Or, press DISPLAY on the remote control (provided) to turn on/off the date indication.
• Time Code
..... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 50).
•Playback Sound Mode, Tape Speed And Tape Running Displays
..... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 50).
