JVC GR-DVL765 32 EN, Dubbing Still Images Recorded On a Tape To a Memory Card, Button

32 EN ADVANCED FEATURES (cont.)

SNAPSHOT Button

Power Switch

Lock Button

Display

Menu Screen

COPY – OF F

ON

SP 6

Play/Pause Button (4/6)

Stop Button (5)

MENU/BRIGHT Wheel

Dubbing Still Images Recorded On A Tape To A Memory Card

Still images can be dubbed from a tape to a memory card.

1 Load a memory card (
pg. 14) and cassette (
pg. 12).

2 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “PLAY” while pressing down the Lock Button.

3 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate it to select “ VIDEO” and press it. The VIDEO Menu appears.

4 Rotate the MENU/BRIGHT wheel to select

“ COPY” and press it. The Sub Menu appears. Rotate it to select “ON” and press it. Selection is complete.

5 Rotate the MENU/BRIGHT wheel to select “ RETURN” and press it twice. The normal playback screen reappears.

6 To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.

7 To start dubbing, press SNAPSHOT. The selected image is stored on the memory card.

• ” blinks during dubbing.

NOTES:

●If SNAPSHOT is pressed in step 7 when a memory card is not loaded, the message “COPYING FAILED” is displayed.

●If an image recorded on the tape using the WIDE mode (
pg. 48) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.

●To use Playback Special Effects with a video image you

wish to dub, perform up to step 7 using the remote control (provided) (
pg. 56).

●Images are dubbed in 640 x 480 pixels.

E-MAIL	VIDEO/MEMORY Switch
Button
	(Open the LCD monitor
	to access this switch.)