JVC GR-DVL815 specifications EN75

					EN75
SYMPTOM		POSSIBLE CAUSES		CORRECTIVE ACTION
26. The indicators and messages	26. • “TIME CODE” is set to “OFF”			26. • Set “TIME CODE” to “ON” in
do not appear.	in the Menu Screen.			the Menu Screen
				( pg. 49, 50).
27. Images on the LCD monitor	27. • In places subject to low			27. • Adjust the brightness and
appear dark or whitish.	temperature, images become			angle of the LCD monitor
	dark due to the characteristics			( pg. 16, 17).
	of the LCD monitor. When
	this happens, the displayed
	colors differ from those that
	are actually recorded. This is
	not a defect of the camcorder.
	• When the LCD monitor's
	fluorescent light reaches the
	end of its service life, images
	on the LCD monitor become
	dark. Consult your nearest
	JVC dealer.
28. The rear of the LCD monitor	28. • The light used to illuminate			28. • Close the LCD monitor to turn
is hot.	the LCD monitor causes it to			it off or set the Power Switch
	become hot.			to “OFF”, and let the unit cool
				down.
29. The indicators and the image	29. • This may occur when the			29.
color on the LCD monitor	surface or the edge of the LCD				————
are not clear.	monitor is pressed.
30. The LCD monitor or	30. • Certain Fade/Wipe effects,			30. • Re-read the sections covering
viewfinder indications blink.	certain modes of Program AE			Fade/Wipe effects, Program
	with special effects, “DIS” and			AE with special effects and
	other functions that cannot be			“DIS” ( pg. 38 – 41, 48).
	used together are selected at
	the same time.
31. Colored bright spots appear	31. • The LCD monitor and the			31.
all over the LCD monitor or	viewfinder are made with
the viewfinder.	high-precision technology.
	However, black spots or
	bright spots of light (red, green
	or blue) may appear
	constantly on the LCD				————
	monitor or the viewfinder.
	These spots are not recorded
	on the tape. This is not due to
	any defect of the unit.
	(Effective dots: more than
	99.99 %)
32. During recording, sound	32. • This is normal.			32.	————
cannot be heard.
33. Play, Rewind and Fast-	33. • The Power Switch is set to			33. • Set the Power Switch to
Forward functions do not	“	” or “	”.	“	” ( pg. 21).
work.
34. A memory card cannot be	34. • The Power Switch is set to			34. • Set the Power Switch to
played back.	“	” or “	”.	“	” ( pg. 28).
	• The VIDEO/DSC Switch is set			• Set the VIDEO/DSC Switch to
	to “VIDEO”.			“	”.

CONTINUED ON NEXT PAGE