Toshiba B-SX8T SERIES Parameter Setting Cont, Maxi Code Specification Selection, reduced, E2-35

2. PRINTER SETUP

ENGLISH VERSION EO1-33057

2.8 Setting an Operating Environment

2.8.1Parameter Setting (Cont.)

(28) Maxi Code Specification Selection

This parameter is to choose a Maxi code specification.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET MAXI CODE TYPE1

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

MAXI CODE TYPE1

TYPE1: Compatible specification with the B-X series

MAXI CODE TYPE2

TYPE2: Specification for specific home delivery company

NOTE:

The stabilizer function is available only to the thermal direct print mode.

After selecting a Maxi code specification, press the [PAUSE] key.

(29) Strip Motor Torque Selection

This parameter is to choose a strip motor torque.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET PEEL OFF TRQ R0

This parameter is fixed to R0.

Press the [PAUSE] key.

(30) Stabilizer Function Selection

This parameter is to choose whether to use the stabilizer function. The stabilizer function reduces the sound of printing.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET STABILIZER ON

Use the [FEED] or [RESTART] key to select a desired option.

				ON: Sound of printing is
		STABILIZER	ON
[RESTART]				reduced.
		STABILIZER	OFF	OFF: Normal printing
	[FEED]

After selecting the stabilizer function, press the [PAUSE] key.

E2-35