Toshiba EO1-33057 Loading the Media Cont, Fixed sensor Movable sensor, Detail of Movable Sensor

2. PRINTER SETUP

ENGLISH VERSION EO1-33057

2.4 Loading the Media

2.4Loading the Media (Cont.)

NOTES:

1. When using the Movable sensor,

choose the Movable sensor for

the parameter setting in the

13.After loading the media, it may be necessary to set the position of the Media Sensor used to detect the print start position for label or tag printing.

This printer is equipped with two media sensors: Fixed sensor and Movable sensor. Each of them is comprised of a Feed Gap Sensor and a Black Mark Sensor.

system mode (Section 2.8.1

Parameter Setting). The Fixed

sensor has been selected as

default.

2. The position of the movable

sensor should be adjusted

before loading the ribbon.

Otherwise, the sensor is

Fixed sensor:

Movable sensor:

This sensor is positioned at the centre of the printer unit. It is intended for detecting gaps between labels or black marks marked at the centre.

The position of this sensor is adjustable. It is intended for detecting gaps between labels, black marks, notches, etc. that are not positioned at the centre of the media.

covered by the ribbon, causing

the sensor position adjustment

to be disabled.

Movable Sensor

Fixed Sensor

Media Sensor Plate

Detail of Movable Sensor

Black Mark Sensor

Position

Feed Gap Sensor Position

Detail of Fixed Sensor

Feed Gap Sensor

Position

Black Mark Sensor Position

E2- 7